D-Link DCS-900 manual ƒ Click Start, Setting, Control Panel, and the Network icon

Page 73

Troubleshooting (continued)

Internet Camera Installation

A2: Another possible reason is the IP Address is located on a different subnet. To fix the problem, run the PING utility (follow the instructions in Appendix B - PING Your IP Address). If the utility returns “no response” or similar, the finding is probably correct, then you should proceed as follows:

In Windows 98SE and 2000, check that the IP Address of the Internet Camera is within the same subnet as your workstation.

ƒClick Start, Setting, Control Panel, and the Network icon.

ƒSelect TCP/IP from the Network dialog box and from the TCP/IP Properties dialog box click on Specify an IP address.

ƒIf the Internet Camera is situated on a different subnet than your workstation, you will not be able to set the IP Address from this workstation. To verify, make sure the first 3 sections of the IP Address of the Internet Camera corresponds to the first 3 sections of the workstation. Therefore the IP Address of the Internet Camera must be set from a workstation on the same subnet.

A3: Other possible problems might be due to the network cable. Try replacing your network cable. Test the network interface of the product by connecting a local computer to the unit, utilizing a standard Crossover (hub to hub) Cable. If the problem is not solved the Internet Camera might be faulty.

Q: Why does the Power LED not light up constantly?

A:The power supply used might be at fault. Confirm that you are using the provided power supply, which is DC 5V, for the Internet Camera and verify that the power supply is well connected.

Q: Why does the LAN LED not light up properly?

A1: There might be a problem with the network cable. To confirm that the cables are working, PING the address of a known device on the network. If the cabling is OK and your network is reachable, you should receive a reply similar to the following (…bytes = 32 time = 2 ms).

A2: The network device utilized by the Internet Camera is not functioning properly, such as hubs or switches. Confirm the power for the devices are well connected and functioning properly.

73

Image 73
Contents Version Link DCS-900Contents Package Contents Introduction Features & BenefitsSimple to Use Supports a Variety of PlatformsRemote Monitoring Utility Web ConfigurationBroad Range of Applications DC Power Connector Network Cable ConnectorReset Button ConnectionsBottom Panel view Leds Power LEDAttach the Swivel Stand Hardware InstallationSecurity Using the Setup Wizard Using the Setup Wizard Click Restart Web Configuration DCS-900 ConfigurationAdvanced DCS-900 ConfigurationTools Status HelpAdvanced System Location Camera NameIP Assignment Manually AssignDNS IP Address LED Control Assign Automatically UsingOpen Second Port Loading ActiveX FromApply/Cancel Installing the DCS-900 Behind a Router Single Camera InstallationAssign a Local IP Address for Your Camera Identify Your Camera on the NetworkAssigning and opening second port in the DCS-900 For Installing Multiple CamerasOpen Second Port Router SET-UP and Installation Assigning and Opening Virtual Server Ports Open Virtual Server Ports To Enable Remote Image ViewingViewing Your Camera Advanced Video Password with a Tools AdminLight Frequency Add User User PasswordUser Name Important InformationDateTime Tools TimeIP Address TimeZone ProtocolFactory Reset Tools DefaultStatus ActiveX Completing Your Camera ConfigurationJava IPView Lite Application Installation IPView Lite Application Installation IPViewLite Click Next Click FinishIPView Lite Application Installation IPView Lite IPView Lite Getting StartedChange Password How to Change the PasswordIPView Lite Getting Started Changing the IP Address How to Change the IP AddressIPView Lite- Getting Started How to Add a Camera IPView Lite Getting Started How to Delete a Camera How to Add/Delete a CameraHow to Format the Camera view How to take a Snap-Shot with the Camera How to Rotate the Video viewIPView List Getting Started How to Stop Recording How to Start RecordingGeneral Camera Property Settings GeneralIP Assignment Camera Property Settings IP AssignmentDNS Camera Property Settings DNSMisc Camera Property Settings Misc, ImageImage Users Camera Property Settings UsersDate/Time Camera Property Settings Date/TimeIPView Getting Started Camera Property Settings InformationInformation Upgrade Firmware Camera Property Settings ToolsTools Recording Options Camera Property Settings RecordingManual Recording Scheduled Recording File Path File OptionsMenu Bar Menu Bar View List View Menu Bar Camera, Tools Enable FunctionMenu Bar Tools System ConfigurationAccount IPView Lite Getting Started Menu Bar About Networking ConfigurationIPView Lite Icon Description Context Sensitive Menu Uninstall IPView Application Uninstall IPView Application What is an Internet Camera? Internet Camera FeaturesWhat algorithm is used to compress the digital image? Can I capture still images from the Internet Camera?Troubleshooting Frequently Asked QuestionsInternet Camera Installation Cannot access the Internet Camera from a web browserWhy does the Power LED not light up constantly? ƒ Click Start, Setting, Control Panel, and the Network iconWhy does the LAN LED not light up properly? Focus on the Internet Camera is bad, how can I correct it? Noisy images occur. How can I solve the problem?There are no images available through the web browser? Appendix BHow to Ping your IP Address Time Zone Table Time Zone Table Installation Xplug Control InstallationConfiguration Installation of the X-Plug to a Local PC Click Next Click Yes Camera Lens Adjusting the Camera FocusAdjusting the Camera Focus Video specification Technical SpecificationsImage Video Setting System HardwareEMI & Safety Technical SpecificationsWeb Configuration Requirements Communication SupportTech Support for customers within the United States Contacting Technical SupportTech Support for customers within Canada Warranty and Registration Warranty and Registration Warranty and Registration
Related manuals
Manual 2 pages 63.12 Kb