Playback
Transfer
39
Symptom |
| Cause |
| Solution | |
| 1. | Operation Mode Selector is set to | 1. | Set selector to Playback mode | |
|
| camera mode | 2. | Set TV to correct channel for video | |
No Image is present | 2. If using a TV, wrong channel is selected |
| playback | ||
| 3. | Not connected properly | 3. | Reconnect the cables | |
| 4. | Wrong TV system | 4. Use NTSC or PAL TV system only. | ||
| 1. Software is not installed | 1. | Install the software (see chapter 4) | ||
Cannot open the | |||||
2. Not using Windows 98 with USB | |||||
Photo Album |
| system | |||
| connection |
| |||
|
| ||||
|
|
| |||
|
|
|
| ||
Cannot transfer data | 1. Incorrect cable connection | 1. | Reconnect the cables | ||
2. Camera is not turned on | 2. | Turn on the camera | |||
| |||||
|
|
|
| ||
| 1. CF Card is not formatted | 1. Reformat through DOS using CF Adapter | |||
CF Card error |
| and PCMCIA slot. | |||
2. Card memory exceeds 32 MB |
| ||||
| 2. Replace card with lower memory capacity. | ||||
|
|
| |||
| 1. | Operation Mode Selector is in Camera | 1. | Select Playback mode/Delete Menu | |
|
| mode | |||
Cannot delete image |
| 2. | From Playback mode, unprotect the image | ||
2. | The image is protected | ||||
| 3. | Have fun. Take pictures. | |||
| 3. | There are no images to delete | |||
|
|
| |||
| 1. | Camera is not powered on | 1. | Power on the camera | |
| 2. | Ensure USB cable is properly connected | |||
“Device not ready” | 2. | USB not connected properly | |||
3. | Refer to the Control Panel/Systems/Device | ||||
OR | 3. | USB host controller problem | |||
| Manager for more details | ||||
Connection Failure | 4. | USB data transfer error |
| ||
4. | Unplug and reconnect the USB cable | ||||
| 5. | Hardware compatibility problem | |||
| 5. | Contact your computer vendor for help | |||
|
|
| |||
|
|
|
|
|