5. Put in the new batteries with the button end (positive) first.
The easy way to load the 4 button cells is to stack them up (button end up) on a sheet of paper or card, slide the focus light over them, then tilt the light with paper upright..
6.Replace the end cap by screwing it in all the way.
7.Replace the focus light on the illuminator, and position it so the flex end can be placed into the clip at the 12:00 position (top center) of the lens.
8.A set of batteries in the focus light will provide about 150 hours of illumination.
Using other lenses
For other photography you may remove the lens and illuminator and attach another lens such as a zoom,
For more information – Technical Support
Contact Miles Research for additional information of technical support
Jon Miles
Miles Research
141 E 13th Ave Escondido, CA 92025
Use of Iris Camera | 19 |