Nikon mec-2-fl-d60-n105 How To Transfer Iris Images Using The Card Reader, Important Card Usage

How To Transfer Iris Images Using The Card Reader

1.Start with the reader unplugged

2.Insert the SD Flash memory card into the card reader

3.Plug the card reader into the computer’s USB socket The blue light on the card reader will illuminate:

4.The drive letters should show up in “My Computer” in a few seconds. Most Windows operating systems, including XP, will recognize the card reader without need of installing any driver from the mini-CD. When plugged in to a USB port, it shows up in My Computer as the next unassigned drive letter.

5.At this point the flash memory module can be opened up like any other folder on a disk drive. You can then copy pictures from the flash memory to the hard drive by dragging the filename/icons.

6.IMPORTANT: When you are done transferring files via the USB memory card reader, you must be careful about how you disconnect it from Windows. First, close out any folders or programs (such as any picture viewer or browser window), so that nothing is referencing the memory card.

7.With Windows 2000 and Windows XP, you need to “Stop” the USB device by clicking a small icon in the lower right corner that has a green arrow on it.

a.If you click it with the left button, a list of USB devices will pop up. Click on the “Mass Storage Drive” that has 4 drive letters associated with it.

b.If you click it with the right button:

i.Click the popup “Safely Remove Hardware” with the left button.

ii.Select the Card Reader device (e.g. USB Mass Storage Device) and click Stop.

iii.Highlight the USB Mass Storage Device again and click Stop.

8.If the message complains that the folder is in use, check all folders, and even if it is not in use, click it again, possibly a third time. Then it will say it is safe to unplug your device. The LED light on the card reader will go off.

9.Disconnect the USB card reader from the computer.

10.Then remove the memory card.

Important – Card Usage:

a.If you are using a card reader, close each window that is referring to the memory card, and any program that may be accessing it. Then go to the small icon tray at the lower right of the Windows toolbar (normally at the bottom of the screen) and left-click the icon with the left-pointing green arrow, then left-click the item in the list of USB devices that has 1 to 4 (depending on which card read you have) drive letters. The most recently added USB device is usually at the top of this list.

b.A message will pop up saying it is now safe to remove the USB device. Unplug the USB cord and then remove the memory card and re-insert it into the camera. If you do not see the USB icon with the green arrow, click the “<<” symbol to reveal all of the icons.

c.If you are reading off the camera, the USB disconnection procedure may begin with the switching off of the camera.

d.The camera must always be switched off when removing or inserting memory cards.

e.Never switch off power or eject a card while data transfer activity is taking place.

Use of Iris Camera MEC-2-FL-D60-N105 12