Yamaha HTR-6150 68 En, Speaker distance CSP Distance, Center speaker equalizer Dcenter GEQ

Page 72

SET MENU

■Speaker distance C)SP DISTANCE

Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sounds will arrive at the listening position at the same time.

1 SOUND MENU

1 SOUND MENU

C)SP DISTANCE 1/2

C)SP DISTANCE 2/2

. UNIT;;;;;;;;feet

. SUR. L;;;;;8.0ft

FRONT L;;;10.0ft

SUR. R;;;;;8.0ft

FRONT R;;;10.0ft

SB L;;;;;;;8.0ft

CENTER;;;;;8.5ft

SB R;;;;;;;8.0ft

SWFR;;;;;;10.0ft

 

[p]/[p]:Up/Down

[p]/[p]:Up/Down

[p]/[[]:Adjust

[p]/[[]:Adjust

Unit UNIT

Choices: meters (m), feet (ft) Initial setting:

[U.S.A. and Canada models]: feet (ft)

[Other models]: meters (m)

•Select “meters” to adjust speaker distances in meters.

•Select “feet” to adjust speaker distances in feet.

Speaker distances

Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)

Control step: 0.10 m (0.5 ft) Initial setting:

FRONT L/FRONT R/SWFR: 3.00 m (10.0 ft)

CENTER: 2.60 m (8.5 ft)

SUR. L/SUR. R/SB L/SB R: 2.40 m (8.0 ft)

SP DISTANCE

Adjusted speaker

FRONT L

Front left speaker

 

 

FRONT R

Front right speaker

 

 

CENTER

Center speaker

 

 

SWFR

Subwoofer

 

 

SUR. L

Surround left speaker

 

 

SUR. R

Surround right speaker

 

 

SB L

Surround back left speaker

 

 

SB R

Surround back right speaker

 

 

Notes

•The available speaker channels differ depending on the setting of the speakers.

•Instead of “SB L” and “SB R”, “SUR.B” is displayed if “SUR.B L/R SP” is set to either “SMLx1” or “LRGx1” (see page 66).

■Center speaker equalizer D)CENTER GEQ

Use this feature to adjust the built-in 5-frequency band (100Hz, 300Hz, 1kHz, 3kHz and 10kHz) graphic equalizer for the center channel so that the tonal quality of the center speaker matches that of the front speakers. You can make adjustments while listening to the currently selected source component or a test tone.

Control range: –6.0 to +6.0 dB

Control step: 0.5 dB

Initial setting: 0 dB

1 SOUND MENU

 

D)CENTER GEQ

 

TEST

>OFF

ON

. 100Hz

;;;;;;

0dB

300Hz

;;;;;;

0dB

1kHz

;;;;;;

0dB

3kHz

;;;;;;

0dB

10kHz

;;;;;;

0dB

[p]/[p]:Up/Down [p]/[[]:Adjust

Test tone TEST

Use this feature to make adjustments for “CENTER GEQ” while listening to a test tone.

Choices: OFF, ON

•Select “OFF” to stop test tones and output the currently selected source component.

•Select “ON” to output test tones from the center and front left speakers.

■Low-frequency effect level E)LFE LEVEL

Use this feature to adjust the output level of the LFE (low- frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective when the input signal contains the LFE channel.

Control range: –20 to 0 dB

Control step: 1 dB

1 SOUND MENU

E)LFE LEVEL

.SPEAKER;;;;;;0dB HEADPHONE;;;;0dB

[p]/[p]:Up/Down [p]/[[]:Adjust

Speaker SPEAKER

Adjusts the speaker LFE level.

Headphone HEADPHONE

Adjusts the headphone LFE level.

Note

Depending on the settings of “LFE/BASS OUT” (see page 66), some signals may not be output at the SUBWOOFER OUTPUT jack.

68 En

Page 71 Page 73
Image 72
Page 71 Page 73
Contents HTR-6150 Important Safety Instructions FCC Information for US customers Example of Antenna GroundingFor Canadian Customers Serial NoContents Features Supplied accessories Installing batteries in the remote controlGetting started We Want You Listening For a LifetimeSet up your speakers Quick start guidePreparation Check the items Press Scene 1 button Enjoy DVD playbackSurround and surround back speakers Connect the subwoofer cable to the inputJack of the subwoofer and the Subwoofer Output jack of this unitFor further connections Using the other Scene buttons Press Scene 1 buttonAbout Scene function Check the type of the connected speakersWhat do you want to do with this unit? Connections Rear panelName S.A. modelPlacing speakers 10 EnConnecting speakers 11 EnFront B terminals Before connecting to the Speakers Terminal Connecting to the Front a terminalsUsing bi-amplification connections 12 EnInformation on jacks and cable plugs 13 EnAudio jacks Video jacksAudio signal Compatible Information on Hdmi14 En Hdmi compatibility with this unitAudio and video signal flow Audio signal flowVideo signal flow 15 EnConnecting video components 16 EnConnecting other components Connecting a DVD player17 En DVD playerConnecting a DVD recorder, PVR or VCR Connecting a set-top box18 En DVD recorder PVR or VCRConnecting audio components Connecting a CD player and a CD recorder/MD recorderConnecting a multi-format player or an external decoder 19 EnUsing Remote IN/OUT jacks 20 EnCD or DVD Using the Video AUX jacks on the front panel Connecting the FM and AM antennas21 En Connecting the power cable Connecting the wire of the AM loop antenna22 En Assembling the supplied AM loop antennaSetting the speaker impedance Turning on and off the powerSet this unit to the standby mode 23 EnFront panel display 24 EnUsing the remote control 25 EnOptimizing the speaker setting for your listening room Using Auto Setup26 En 27 En 28 En Number of speakers SPSpeaker distance Dist Speaker level LVLIf an error screen appears Press 8n and then press 8l / h to select SET or Cancel29 En If Warning appearsSelecting the Scene templates Selecting the desired Scene template30 En Selected Scene template is assigned to the button31 En Which Scene template would you like to select?Preset Scene templates descriptions 32 EnCustomizing the preset Scene Templates Creating your original Scene templates33 En Renaming the Scene templatesUsing remote control on the Scene feature Controlling the input source Components in the Scene mode34 En Quick guide to contents PlaybackBasic operations 35 EnSelecting audio input jacks Selecting the Multi CH Input component36 En Using your headphones Muting the audio output37 En Current status screen appears in the OSDDisplaying the input source information 38 EnAudio information Video informationUsing the sleep timer 39 EnSound field programs Sound field program descriptions40 En Enjoying 2-channel sources using Standard decoders Enjoying unprocessed input sources Straight decoding mode41 En 42 En Editing sound fields parametersUsing audio features Adjusting the tonal qualityAdjusting the speaker level Enjoying high quality soundSelecting the night listening mode 44 EnFM/AM tuning Automatic tuningManual tuning 45 EnAutomatic preset tuning Manual preset tuning46 En Selecting preset stations Exchanging preset stationSee Selecting preset stations on this Press and hold D PRESET/TUNING for more than 3 secondsXM Satellite Radio tuning 48 EnXM Satellite Radio online information XM Ready legal disclaimerActivating XM Satellite Radio Basic XM Satellite Radio operations49 En All Channel Search mode Category Search modePreset Search mode Direct Number Access modeSetting XM Satellite Radio preset channels Preset channel number appears in the front panel display51 En Displaying the XM Satellite Radio information 52 EnDisplaying the XM Satellite Radio information in the OSD Sirius Satellite Radio tuning Connecting the SiriusConnect tuner53 En Sirius Satellite Radio legal disclaimerActivating Sirius Satellite Radio subscription Basic Sirius Satellite Radio operations54 En Displaying the Sirius ID of your SiriusConnect tunerPRESET/TUNING/CH l/ h or 8PRESET/CH k/ n PRESET/TUNING/CH l/ hor 8PRESET/CH k/ n55 En Setting the Parental Lock Setting the code number and the locked ChannelsTUNING/CH l/ hor 8PRESET/CH k/ n 56 EnTuning into the locked channels 57 EnPress 8ENTER to confirm the code number Press 8ENTER to lock the selected channel58 En Press I Info or OdisplayALL PopUsing iPod Remote control operationControlling iPod in the simple remote Mode Controlling iPodControlling iPod in the menu browse Mode 60 EnFunction of the play information display Using Bluetooth components Playback of the BluetoothPairing by using SET Menu Quick pairingRecording 62 EnAuto setup Auto Setup Manual setup Manual Setup63 En Using SET Menu Signal information Signal Info64 En Speaker settings Aspeaker SET 65 En66 En Subwoofer phase Subwoofer Phase 67 EnSpeaker level BSP Level Crossover Crossover68 En Speaker distance CSP DistanceCenter speaker equalizer Dcenter GEQ Low-frequency effect level Elfe LevelAudio settings Gaudio SET 69 EnExtended decoder select mode 70 EnExtended surround Iextd SUR Support audio S.AUDIO71 En Input assignmentFor Coaxial Input jack For Optical Input jacks 2Multi channel input setup 72 EnDisplay settings Adisplay SET 73 En74 En Parameter initialization DPARAM. INIMemory guard Bmemory Guard Audio select Caudio SelectBluetooth setting Ebluetooth SET XM Radio setting FXM Radio SET A. and Canada models onlySirius Satellite Radio setting 75 EnRemote control features Controlling this unit, a TV, or other components76 En Controlling this unit77 En Controlling other componentsSetting remote control codes Remote control code default settingsInput Component Manufacturer Default 78 EnUsing multi-zone configuration Connecting ZoneUsing the external amplifier 79 EnControlling Zone 80 EnControlling Zone 2 with the front panel Controlling Zone 2 with the remote control 81 EnTurning on Zone While pressing and holding 5AMP, press Advanced setup Bi-amplifier setting BI-AMP82 En Speaker impedance SP IMP A. and Canada models onlyScene IR code setting Scene IR 83 EnTuner frequency step TU Asia and General models only Initializing InitTroubleshooting Problem Cause Remedy See84 En GeneralProblem Cause Remedy 85 En86 En 87 En Tuner88 En XM Satellite Radio89 En Sirius Satellite RadioBefore Auto Setup During Auto Setup90 En After Auto Setup 1OUT of Phase3LEVEL Error 91 EnBluetooth 92 EnRemote control Resetting the systemAdvanced setup menu appears in the front panel display 93 EnGlossary 94 En95 En Video signal 96 EnSpecifications 97 EnSymbols Index98 En Numerics9INTERNAL Error 99 En100 En Playing video sources101 En XM AntennaFront panel/Face avant BCD E F IJ KRemote control/Boîtier de télécommande List of remote control codes Liste des codes de commande IiiAGB KTV VCR MEI HTR-6150 Front panel/Face avantRemote control/Boîtier de télécommande

HTR-6150 specifications

The Yamaha HTR-6150 is a versatile and powerful home theater receiver designed to enhance your audio and video experience. This receiver is a testament to Yamaha's commitment to providing high-quality sound and cutting-edge technology, making it an ideal choice for both home theater enthusiasts and casual listeners alike.

One of the standout features of the HTR-6150 is its ability to deliver rich, immersive sound through multiple channels. With 5.1-channel surround sound, it allows users to take full advantage of movies, music, and video games by creating a multidimensional audio experience. The built-in Dolby Digital and DTS decoding processes ensure that users enjoy high-fidelity sound that meets modern standards in home entertainment.

The HTR-6150 also supports various audio formats, allowing for wider compatibility with different media sources. It includes inputs for HDMI, component, and composite video, enabling connections to a variety of devices, including Blu-ray players, gaming consoles, and cable boxes. The presence of multiple HDMI inputs facilitates easy switching between devices without the need for constant rearranging of cables.

In terms of power, the Yamaha HTR-6150 boasts a robust amplifier section, delivering 100 watts per channel, which is sufficient to drive most speakers with ease. This power output ensures that the receiver can reproduce sound at loud volumes without sacrificing clarity or detail, allowing you to enjoy every nuance of your favorite media.

Another notable technology embedded in the HTR-6150 is Yamaha's proprietary YPAO (Yamaha Parametric room Acoustic Optimizer). This feature automatically calibrates the receiver's audio output to suit the acoustic characteristics of your specific room, ensuring that sound performance is optimized no matter the environment. By measuring the sound in your room and making necessary adjustments, YPAO enhances the overall listening experience.

A user-friendly interface enhances the usability of the HTR-6150. With an informative on-screen display, navigating through settings and options is straightforward. The included remote control also offers convenient access to all functions, making it easy to switch between sources and adjust volume levels.

Overall, the Yamaha HTR-6150 is a well-rounded home theater receiver that brings together powerful audio capabilities, advanced technology, and user-friendly features. It is an excellent solution for anyone looking to elevate their home entertainment setup with quality sound and versatile functionality. Whether you are watching movies, playing games, or enjoying music, the HTR-6150 delivers an engaging audio experience that truly enhances your enjoyment.
Top Page Image Contents