Yamaha HTR-6150 owner manual 72 En, Multi channel input setup

SET MENU

4Repeat steps 1 through 3 to rename each input source.

5Press 8ENTER to exit from “INPUT RENAME”.

■Volume trim C)VOLUME TRIM

Use this feature to adjust the output volume of each source. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources.

Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL, V-AUX, DVR, DOCK,

MULTI CH, XM, SIRIUS Control range: –6.0 to +6.0 dB Control step: 1.0 dB

Initial setting: 0.0 dB

2 INPUT MENU

C)VOLUME TRIM

DVD

DVD ;;;;;0.0dB

[p]/[[]:Adjust [RETURN]:Exit

Note

You can only adjust the value for DOCK when your iPod is stationed in the Yamaha Universal Dock connected to this unit.

■Decoder mode D)DECODER MODE

2 INPUT MENU

D)DECODER MODE

.>AUTO LAST

CD ;;;;AUTO

DVD ;;;;AUTO

DTV/CBL ;;;;AUTO

[p]/[p]:Up/Down [p]/[[]:Select

Decoder select mode

Use this feature to designate the default decoder mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit.

Choices: AUTO, LAST

•Select “AUTO” if you want this unit to automatically detect the type of input signals and select the appropriate decoder mode.

•Select “LAST” if you want this unit to automatically select the last decoder mode used the connected input source.

72 En

DTS decoder prioritize setting

Choices: AUTO, DTS

•Select “AUTO” if you want this unit to automatically detect input signal types and select the appropriate input mode.

•Select “DTS” when you play back a DTS-CD.

■Multi channel input setup

E)MULTI CH SET

2 INPUT MENU

E)MULTI CH SET

BGV;;;;;;;;;LAST

INPUT CH;;;;;6CH

[p]/[[]:Select

Background Video BGV

Use this feature to select the video source played in the background of the sources input at the MULTI CH INPUT jacks.

Choices: DVD, DTV/CBL, V-AUX, DVR, LAST

y

Select “LAST” to set this unit to automatically select the last selected video source as the background video source.

Input channels INPUT CH

Use this setting to select the number of channels input from an external decoder (see page 19).

Choices: 6CH, 8CH

2 INPUT MENU

E)MULTI CH SET

BGV;;;;;;;;;LAST

INPUT CH;;;;;8CH

FRONT;;;;;;;;DVD

[p]/[[]:Select

If the connected component outputs discrete 6-channel audio signals.

Select “6CH”.

If the connected component outputs discrete 8-channel audio signals.

Select “8CH”. Also set “FRONT” (see below) to the analog audio jacks at which the front left and right channel signals output from the connected component are input.

Front left and right channels input jack FRONT

If you selected “8CH” in “INPUT CH”, you can select the analog audio jacks at which the front left and right channel signals output from the connected external decoder is input.

Choices: DVD, DTV/CBL, DVR, V-AUX

Note

“FRONT” parameter appears only when you set “INPUT CH” to “8CH”.