Nikon F80D instruction manual Imprinting date/time, Imprinted date/time

Page 47

Adjustingj i Date and Timei and ImprintingI i i Data—continuedi

5 Push MODE button to select Day/Hour/Minute display.

6 Push SELECT button so hour section starts blinking.

•Each time you push the SELECT button, the blinking section moves in the order of hour, minute and : (colon).

7 Push ADJUST button to set the hour to “15”.

8 Set the minute following steps 6 and 7. When the setting is complete, push the SELECT button twice so the newly adjusted time display appears without blinking.

	• Pushing the SELECT button once makes : blink and pushing it a second
92	time makes — appear. When — appears, the setting is complete.

•To set time to the precise second, push the SELECT button once at the step 8 so : indication blinks. When the actual time coincides with the time you have set, push the ADJUST button. The clock starts from 00 sec. (Seconds are not displayed in the LCD panel.)

Example: To set the clock to 13:00:00:

Set the clock to 13:00. Push the SELECT button so : indication blinks. When the time becomes exactly 13:00:00, push the ADJUST button to start the clock at exactly 13:00:00.

•Batteries in the camera body also power the Quartz Date. Set the date and time after installing batteries for the first time. When changing batteries, date and time remain in the Quartz Date memory up to approx. 15 minutes without batteries. If the date and time data are lost, reset them.

•Imprinting date/time

Push MODE button to select date/time display and fully depress the shutter release button to take a picture with the imprinted date/time.

• The data displayed on the data imprint LCD will be imprinted on the picture. Select ------(no imprint) to cancel data imprint. Compatible film speeds for data imprinting are ISO32-3200.

• Data imprint indicator — blinks for approx. two to three sec. immediately

after the shutter is released (when a film is loaded).

					Back
Imprinted date/time
The illustration at right indicates the					Data
The illustration at right indicates the
position of the imprinted date/time on the
film. It may be difficult to read against
film. It may be difficult to read against
bright colours such as white or reddish
hues.



		93

Image 47

Contents Page Nomenclature Viewfinder Display About Nikon Advanced Focusing Screen DisplayLCD Panel/Viewfinder Display LCD panelExposure Command DialsCustom Setting FilmHave Nikon spot-check your camera regularly Using your camera correctlyIntroduction Take trial shotsContents Load Film Install Batteries and Check BatteryPower Mount Lens About This ManualSitua Basic OperationCover, then firmly close the battery chamber cover Turn the power switch off and open the batteryChamber cover by sliding the battery chamber cover Positioned as marked inside the battery chamberDetaching the lens When camera is left unattended without lensMount Lens Check the lens typeLoad Film Focus area Set the focus mode selector to S Single Servo AFSet the AF Area mode selector to g Single Area AF Rotate the focus area selector lock lever to lockSet the metering system selector to Matrix Metering Set the exposure mode select dial to ¡ Auto-Multi 2 ProgamShooting characteristics of exposure modes Camera shake and shutter speed Hold Camera and FocusHold the camera properly Confirm that film is completely rewound, then Confirm indications in the viewfinder while lightlyPressing the shutter release button. Shutter speed Aperture are shown in 1/2 stepsAutomatically Using Built-In SpeedlightPress the Speedlight lock-release button to release Speedlight. The Speedlight starts chargingExposure Metering SystemType Nikkor and other CPU Nikkor lens When a non-CPU lens is attachedTypes of CPU lenses and other usable lenses/accessories Lens CompatibilityMid-roll rewind Setting and confirming film speedFilm advance mode FilmAutofocus AF Area ModeRotate AF Area mode selector to select AF Area mode Focus mode selectorFocus Dynamic AF Mode with Closest Subject Priority JAutofocus modes Optional Speedlight and AF-Assist Illuminator Focus AreaAF-Assist Illuminator Shoot Confirm focus indicator / and lock focusFocus Lock While keeping the focus locked, recomposePatterned subject or scene Manual focus using Electronic RangefinderManual Focus Matrix Metering/3D Matrix Metering Centre-Weighted MeteringMetering systems and characteristics of each are as follows Exposure Metering SystemCompose picture, focus and shoot Shooting in Each Exposure ModeRotate the exposure mode select dial to select ¡ ¡ Auto-Multi ProgamShutter-Priority Auto Rotate the exposure mode select dial to select£ Aperture-Priority Auto Rotate the exposure mode select dial to select £Set the aperture by rotating the Sub-Command Dial Electronic analog exposure display ¢ ManualAuto Exposure Lock Auto Exposure Bracketing Exposure compensation can be performed in any exposure modeExposure Compensation Standard compensation value in Multiple exposure Multiple ExposureMultiple Exposure Long Time Exposure Composeshoot. picture, confirm focus indicator /Rotate the Main-Command Dial to select buLb Rotate the Sub-Command Dial to set the apertureComposition Self-Timer Operation Custom SettingMenu/Features of Custom Setting Closest-subject-priority Dynamic AF in Single Servo AF Auto film loading when camera back is closedIllumination for superimposition Focus area selectionFilm rewind pages Command Dial functions pagesTime delay for auto meter-switch-off Self-timer durationFlash Photography Two-Button ResetMulti-Sensor Balanced Fill-Flash Accessory shoeBuilt-in Speedlight 3D Multi-Sensor Balanced Fill-Flash› Red-Eye Reduction Flash Sync Mode Features¤ Slow Sync ‹ Rear-Curtain SyncFlash shooting distance range for built-in Speedlight Using the Built-In SpeedlightSet exposure mode and confirm shutter speed and aperture Set the metering systemUsable lenses with built-in Speedlight Usable Lenses with Built-In SpeedlightUsable Optional Speedlights Flash modeFocus Tracking Depth of fieldNewly adjusted date display appears without Push Mode button to select one of the date displaysPush Adjust button to set the year to Setting is complete, push the Select button soImprinted date/time Imprinting date/timeMiscellaneous Optional Accessories Camera Care Keep batteries out of children’s reach TroubleshootingTurn the camera power off when changing batteries Use fresh batteries at low temperaturesUnderexposure CPU Specifications106 107 108 109 Index Custom Setting Menu 114 115 Nikon Corporation