Nikon F80D Shutter-Priority Auto, Rotate the exposure mode select dial to select

Page 27

Shooting in Each Exposure Mode—continued

•™: Shutter-Priority Auto

Enables you to manually set your desired shutter speed (30-1/4000 sec.); the camera automatically selects the proper aperture to provide correct exposure. With high shutter speeds, you can freeze the motion of a fast-moving subject; with slower speeds, you can create a blurry, motion effect.

•Shutter-Priority Auto can only be selected with CPU Nikkor lens (page 34).

1 Rotate the exposure mode select dial to select ™.

NOTE: Minimum aperture with CPU Nikkor lens (except G-type)

Always set the aperture ring of a CPU Nikkor lens (except G-type) to its minimum (largest f-number). When the lens is not set to its minimum aperture setting, ƒEE blinks in the LCD panel and viewfinder and the shutter locks.

•When a non-CPU Nikkor lens is attached, ƒ--blinks in the LCD panel and viewfinder, and the shutter cannot be released. In this case, set the exposure mode to Manual (page 56) and set/confirm aperture with the lens aperture ring. Camera’s exposure meter cannot be used. See “Lens Compatibility” on page 34 for details.

•If buLb is selected in Manual exposure mode and the exposure mode is changed to Shutter-Priority Auto without cancelling buLb, buLb blinks and the shutter locks. To shoot in Shutter-Priority Auto exposure mode, select shutter speed other than buLb by rotating the Main-Command Dial.

2 Set the shutter speed (30-1/4000 sec.) by rotating the Main-Command Dial.

c 12: Shutter speed can be set to change with Sub-Command Dial (page 74).

3 Compose picture, focus and shoot.

• When the subject is too dark or bright, one of the following warning

indications will appear in the LCD panel or viewfinder. (Electronic analog
exposure display will also indicate the amount of under- or overexposure.)
• H1: Select higher shutter speed. If the warning indication still remains
on, use ND filtre.
• Lo: Select a slower shutter speed. If the warning indication still remains
on, use the Speedlight.	Exposure
	Exposure

52

53

Image 27

Contents Page Nomenclature Viewfinder Display About Nikon Advanced Focusing Screen DisplayLCD Panel/Viewfinder Display LCD panelExposure Command DialsCustom Setting FilmHave Nikon spot-check your camera regularly Using your camera correctlyIntroduction Take trial shotsContents Load Film Install Batteries and Check BatteryPower Mount Lens About This ManualSitua Basic OperationCover, then firmly close the battery chamber cover Turn the power switch off and open the batteryChamber cover by sliding the battery chamber cover Positioned as marked inside the battery chamberDetaching the lens When camera is left unattended without lensMount Lens Check the lens typeLoad Film Focus area Set the focus mode selector to S Single Servo AFSet the AF Area mode selector to g Single Area AF Rotate the focus area selector lock lever to lockSet the exposure mode select dial to ¡ Auto-Multi 2 Progam Shooting characteristics of exposure modesSet the metering system selector to Matrix Metering Hold Camera and Focus Hold the camera properlyCamera shake and shutter speed Confirm that film is completely rewound, then Confirm indications in the viewfinder while lightlyPressing the shutter release button. Shutter speed Aperture are shown in 1/2 stepsAutomatically Using Built-In SpeedlightPress the Speedlight lock-release button to release Speedlight. The Speedlight starts chargingExposure Metering SystemType Nikkor and other CPU Nikkor lens When a non-CPU lens is attachedTypes of CPU lenses and other usable lenses/accessories Lens CompatibilityMid-roll rewind Setting and confirming film speedFilm advance mode FilmAutofocus AF Area ModeRotate AF Area mode selector to select AF Area mode Focus mode selectorDynamic AF Mode with Closest Subject Priority J Autofocus modesFocus Focus Area AF-Assist IlluminatorOptional Speedlight and AF-Assist Illuminator Shoot Confirm focus indicator / and lock focusFocus Lock While keeping the focus locked, recomposeManual focus using Electronic Rangefinder Manual FocusPatterned subject or scene Matrix Metering/3D Matrix Metering Centre-Weighted MeteringMetering systems and characteristics of each are as follows Exposure Metering SystemCompose picture, focus and shoot Shooting in Each Exposure ModeRotate the exposure mode select dial to select ¡ ¡ Auto-Multi ProgamShutter-Priority Auto Rotate the exposure mode select dial to selectRotate the exposure mode select dial to select £ Set the aperture by rotating the Sub-Command Dial£ Aperture-Priority Auto Electronic analog exposure display ¢ ManualAuto Exposure Lock Exposure compensation can be performed in any exposure mode Exposure CompensationAuto Exposure Bracketing Standard compensation value in Multiple exposure Multiple ExposureMultiple Exposure Long Time Exposure Composeshoot. picture, confirm focus indicator /Rotate the Main-Command Dial to select buLb Rotate the Sub-Command Dial to set the apertureComposition Self-Timer Operation Custom SettingMenu/Features of Custom Setting Closest-subject-priority Dynamic AF in Single Servo AF Auto film loading when camera back is closedIllumination for superimposition Focus area selectionFilm rewind pages Command Dial functions pagesTime delay for auto meter-switch-off Self-timer durationFlash Photography Two-Button ResetMulti-Sensor Balanced Fill-Flash Accessory shoeBuilt-in Speedlight 3D Multi-Sensor Balanced Fill-Flash› Red-Eye Reduction Flash Sync Mode Features¤ Slow Sync ‹ Rear-Curtain SyncFlash shooting distance range for built-in Speedlight Using the Built-In SpeedlightSet exposure mode and confirm shutter speed and aperture Set the metering systemUsable lenses with built-in Speedlight Usable Lenses with Built-In SpeedlightUsable Optional Speedlights Flash modeFocus Tracking Depth of fieldNewly adjusted date display appears without Push Mode button to select one of the date displaysPush Adjust button to set the year to Setting is complete, push the Select button soImprinted date/time Imprinting date/timeMiscellaneous Optional Accessories Camera Care Keep batteries out of children’s reach TroubleshootingTurn the camera power off when changing batteries Use fresh batteries at low temperaturesUnderexposure CPU Specifications106 107 108 109 Index Custom Setting Menu 114 115 Nikon Corporation