Yamaha HTR-5835 owner manual For 2ch Stereo, DSP Level DSP level, Direct Direct

You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your

listening room. Not all of the following parameters are found in every program.

•DSP LEVEL (DSP level)

Function:	Adjusts the	level of all the DSP effect sounds	within	a nan'ow range.
Description:	Depending	on the acoustics of your listening	room,	you may want to increase or decrease the DSP
	effect level	relative to the level of the direct sound.
Control range:	6 dB to +3 dB

•INIT. DLY

Function:

Description:

Control range:

(Initial delay)

Changes the apparent distance from the source sound by adjusting the delay between the direct sound

and the first reflection heard by the listener.

The smaller the value, the closer the sound source seems to the listener. The larger the value, the farther

it seems. For a small room, set to a small value. For a large room, set to a large value. 1 to 99 msec

SOllrce Sound

I

I

II Reflections

2		I [H][] Earl?,
_-_L_	Time	Time
Delay		Delay

] )ound Source

g

_ Reflection Face

Small value = 1 ms La*ge value = 99 ms

For 2ch Stereo:

•DIRECT (Direct)

Function:	Bypasses this unit's decoders and DSP processors for pure high fidelity sound when playing 2-channel
	analog sources. The AUTO setting is effective only when BASS and TREBLE are set to 0 dB.
Choices:	AUTO, OFF

•When mnlti-chamlel signals (Dolby Digital and DTS) are inpm, they are dowlmlixed to 2 chamlels and output from the front left and right speakers•

•When "BASS OUT" is set to BOTH, or "FRONT SP" set to SML and "BASS OUT" set to S\,_TR. front left and right speaker low- frequency signals are redirected to the subwoofer.

65