Yamaha Comprehensive Guide to Speaker Settings for HTR 5835 and More

iiii

Use to manually adjust any speaker setting or compensate

for video signal processing delays when using LCD

monitors or projectors. Most of the SOUND MENU

parameters are set automatically when you perform

"BASIC SETUP" (see page 21).

•Speaker settings A)SPEAKER SET

Use to manually adjust any speaker setting.

5/

If you are not satisfied with the bass sounds from yottr speakers, you can change these settings according to yottr preference.

Front speakers FRONT

Choices: LARGE, SMALL

•Select LARGE if you have large fi'ont speakers. The unit directs the entire range of the front left and right channel signals to the fi:ont left and right speakers.

•Select SMALL if you have small front speakers. The

unit directs the low-frequency signals of the front channel to the speakers selected with "BASS OUT".

Center speaker CENTER

Choices: LRG, SML, NONE

•Select LRG if you have a large center speaker. The unit directs the entire range of the center channel signal to the center speaker.

•Select SML if you have a small center speaker. The

unit directs the low-fi:equency signals of the center channel to the speakers selected with "BASS OUT".

•Select NONE if you do not have a center speaker. The unit directs all of the center channel signal to the front left and right speakers.

Surround left/right speakers SUR. LR

Choices: LRG, SML, NONE

•Select LRG if you have large surround left and right speakers. The entire range of the surround channel signal is directed to the surround left and right speakers.

•Select SML if you have small surround left and right

speakers. The low-frequency signals of the surround channel are directed to the speakers selected with "BASS OUT".

•Select NONE if you do not have surround speakers.

This will set the unit to the Virtual CINEMA DSP mode (see page 30).

l=t_'tl=h',

Bass out BASS OUT

Low-frequency (bass) signals can be directed to the

subwoofer and.or the front left and right speakers

according to the characteristics of your system. This

setting also determines the routing of the LFE (low-

frequency effect) signals found in Dolby Digital or DTS sources.

Choices: SWFR (subwoofer), FRONT, BOTH

•Select SWFR if you connect a subwoofer. LFE and

low-frequency signals fi:om other channels are directed

to the subwoofer according to the speaker settings.

•Select FRONT if you do not use a subwoofer. LFE and

low-frequency signals from other channels are directed

to the fi'ont speakers according to the speaker settings

(even if you have previously set the front speakers to SML).

•Select BOTH if you connect a subwoofer and you want

to output low-frequency signals fi:om fi'ont channels to

both the fi'ont speakers and subwoofer. LFE and low-

frequency signals from other channels are also directed

to the subwoofer according to the speaker settings. Use

this function to reinforce low-fi'equency signals using

the subwoofer when playing back sources such as CDs.

Cross over CrossOver

Use this feature to select a cross-over (cut-oil) fi:equency

for all low-fi:equency signals. All frequencies below the selected fi'equency will be sent to the subwoofer.

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, '120Hz, 160Hz, 200Hz

Subwoofer phase SWFR PHASE

If bass sounds are lacking or unclear, use this feature to switch the phase of your subwoofer.

Choices: NRM (normal), REV (reverse)

•Select NRM if you do not want to reverse the phase of your subwoofer.

•Select REV to reverse the phase of your subwoofer.

•Speaker level B)SP LEVEL

Use these settings to manually balance the level of each

speaker selected in SPEAKER SET (page 55).

Choices: 10.0 dB to +i0.0 dB

•FL adjusts the balance of the front left speaker.

•FR adjusts the balance of the front right speaker.

•C adjusts the balance of the center speaker.

•SI_ adjusts the balance of the surround left speaker.

•SR adjusts the balance of the surround right speaker.

•SWFR adjusts the balance of the subwoofer.

55