Minolta F100 Flash range auto-recording mode, Flash signals, Camera-shake warning

Page 33

Flash range – auto-recording mode

The camera will automatically control the flash output. For well-exposed images, the subject must be within the flash range. Because of the optical system, the flash range is not the same at the lens’ wide-angle position as it is at the telephoto position.

Wide-angle position

0.5m ~ 2.9m (1.6 ft. ~ 9.5 ft.)

Telephoto position

0.5m ~ 1.7m (1.6 ft. ~ 5.6 ft.)

1

Flash signals

The orange flash lamp next to the viewfinder indicates the status of the flash.

When the orange flash lamp blinks quickly (1), the flash is charging and the shutter will not release. The lamp will go out when the flash is charged.

The flash lamp is also used as a camera-shake warning, see below.

Camera-shake warning

If the shutter speed falls below the point where the camera can be safely hand held, the camera- shake warning will appear on the LCD monitor and the orange focus lamp will blink slowly. Camera shake is slight blurring caused by subtle hand motion and is more pronounced at the telephoto set- ting of the lens than at the wide-angle setting. Although the warning appears, the shutter can still be released. If the warning appears, the following steps can be taken:

Place the camera on a tripod.

Use the built-in flash.

Zoom the lens towards the wide-angle position until the warning disappears.

33

Image 33
Contents HA-A204 Before YOU Begin For Proper and Safe USE For Proper and Safe USE Page About this manual Multi-function recording mode advanced operation Short guide to photography Movie recording 100 Camera body Page Viewfinder Mode dialData panel Getting UP and Running Changing the CR-V3 batteryAttaching the hand strap Installing AA batteriesAuto power save Battery condition indicatorConnecting the AC adapter sold separately Changing the memory card About memory cards SwitchSetting the date and time Camera notes Handling the camera AUTO-RECORDING Mode Basic OperationSetting the camera to record images automatically Focus range Using the zoom lensAbout camera operation Basic recording operation Special focusing situations Focus signalsAutomatic Digital Subject Program Selection Digital-subject-program button AUTO-RECORDING Mode Display button recording mode Flash modes Flash range auto-recording mode Flash signalsCamera-shake warning Quick View Deleting images in Quick View Quick-view displayEnlarged playback Other Quick View features Navigating the auto-recording mode menu Basic Drive modes Continuous advance Shooting tips Self-timerRemote control sold separately Normal Under BracketingNumber of frames in bracketing series Frame counter VGA Image size and image qualityApproximate file sizes Recording Tips Voice memoDigital zoom Focus area selection Focus lock Exposure compensation Shooting tips What is an EV? What is a stop?MULTI-FUNCTION Recording Mode Advanced Operation Multi-function recording mode display Navigating the multi-function recording mode menu Custom Exposure modes Programmed AE PAperture priority a Photographer selects the shutter speed and the camera sets Shutter priority SManual exposure M Bulb exposures Preset White Balance White balanceAutomatic White Balance Custom White Balance Focus modes Single-shot AFSubject Tracking AF Full-time AF Manual focusMetering modes AF sensor displayFlash range and camera sensitivity Camera sensitivity ISOHigh contrast scene After compensation Digital Effects ControlSelect enter Date imprinting Instant playback Short Guide to Photography Page Movie Recording Countdown in seconds Recording movies and audio with the RC-3 remote controlAudio Recording Single-frame playback and histogram display Playback Mode Viewing and Editing ImagesPlaying back voice memos and audio captions Viewing imagesDeleting single files Playing back movies and audio recordingsEnlarged playback Image only Display button playback modeNavigating the playback-mode menu Copying to camera memory Sel. conf. enter Frame-selection screenDeleting files Locking files If an audio track is already attached to the image, a Audio captioningSlide show Slide Creating a Dpof Print Order About DpofOrdering an Index Print Copy and E-mail Copy 101MLTEM 101MLTCP Viewing images on a television Minolta History Setup Mode Controlling the CAMERA’S OperationNavigating the setup menu Refer to the following sections Formatting memory cards LCD monitor brightnessFile Number # Memory LanguageFolder name Audio signalsVolume Reset defaultShutter FX YYYY/MM/DD Video output Setting the date formatQuickTime system requirements DATA-TRANSFER Mode Connecting to a ComputerIBM PC / AT Compatible Macintosh System requirementsConnecting the camera to a computer 107 Automatic Installation Connecting to Windows 98 and 98SEManual Installation DATA-TRANSFER Mode Auto power save data-transfer mode Connecting to Mac OSDcim Misc 100MLT08 10120801 102MLTCP 103MLTEM Memory card folder organizationCamera Notes Disconnecting the camera from the computer Windows 98 and 98SEWindows ME, 2000 professional, and XP Macintosh Changing the memory card Data-transfer mode Problem Symptom Cause Solution Make sure the subject is within About Ni-MH batteries Removing the driver software Windows Camera Care Memory cards Operating Temperatures and ConditionsBatteries Copyright Digital Camera Tested To Comply With FCC Standards CCD Page Universal Copyright Convention
Related manuals
Manual 3 pages 5.26 Kb