Minolta 7Hi instruction manual Setting the Function Dial

SETTING THE FUNCTION DIAL

Dial

Display

Setting

Page EVF & Monitor Display

The memory function, metering mode, exposure mode, drive mode, white balance, and camera sensitivity are controlled by the function dial. Making changes with the function dial is simple. The function dial can only be used for still photography.

1

Turn the function dial to the mode to be changed (1).

While pressing the button in the center

of the function dial, turn the control dial

MEM

Menu

Memory registers or the setting function are selected with a spe- cial menu displayed on the mon- itors.

Multi-segment

Center weighted

Spot

50

51

No data panel display.

2	near the shutter-release button to
	change the mode (2). Release the
	function button to set the mode.
	Changes are displayed on the monitors
	and data panel.

MEM Memory - to store and recall camera settings (p. 50).

Metering modes - changes the metering pattern (p. 51).

PASM Exposure modes - changes the method of exposure control (p. 52).

DRIVE	Drive modes - changes the method of image capture (p. 58).
WB	White balance - changes between automatic, preset, and custom
	white balance (p. 67).

ISO ISO - changes camera sensitivity (p. 70).

PASM

DRIVE

WB

ISO

P

A

S

M

100, 200,

400, 800.

Program	53
Aperture priority	54	Display for the
Shutter priority	55
		data panel, EVF
Manual	56	and LCD monitor
Single-frame advance	58	are the same
		unless indicated.
Bracketing	62
Continuous advance	59
High-speed continuous advance	60
UHS continuous advance	61
Interval	64
Self-timer	66
Automatic white balance	68	(No display when set)
Daylight
Tungsten	68
Fluorescent 1 and 2
Cloudy
Custom setting 1 through 3	68
Custom calibration
Automatic gain		(No display when set)
Preset camera sensitivity in ISO	70	ISO value
equivalents.		is displayed

48ADVANCED RECORDING 49