Minolta 7Hi Photographer selects the aperture and the camera sets, Monitors turns blue, Displayed

Page 28

APERTURE PRIORITY - A

2

The photographer selects the aperture and the camera sets

1

the appropriate shutter speed to ensure correct exposure.

 

When A mode is selected, the aperture value on the

 

monitors turns blue.

 

Turn the control dial (1) to set the desired aperture. Press

 

the shutter-release button partway down to activate the

 

exposure system (2); the corresponding shutter speed will

 

be displayed.

The aperture values can be changed by half stop increments between f/2.8 and f/8 at the lens’ wide-angle position and f/3.5 to f/9.5 at the lens’ telephoto position. If the aperture value is beyond the shutter-speed range, the shutter-speed display will blink on the data panel and turn red on the monitors. The shutter speed range in aperture- priority exposure mode is 15 to 1/4000 second when camera sensitivity is set to auto (p. 71).

When the shutter speed falls below an acceptable limit for the camera to be hand held, the camera-shake warning (p. 31) appears in the lower left corner of the EVF and LCD monitor. When the warning appears, decrease the aperture value until the warning disappears or place the camera on a tripod.

Because the shutter speeds can be adjusted in fine steps, the same shutter speed maybe displayed when the aperture is changed. With the camera sensitivity (ISO) set to auto, the shutter speed may not change when the aperture is adjusted.

SHUTTER PRIORITY - S

2

 

The photographer selects the shutter speed and the camera

1

sets the appropriate aperture to ensure correct exposure.

 

 

When S mode is selected, the shutter speed on the

 

 

 

 

monitors turns blue.

 

 

Turn the control dial (1) to set the desired shutter speed.

 

 

Press the shutter-release button partway down to activate

 

 

the exposure system (2); the corresponding aperture will be

 

 

displayed.

 

 

The shutter speeds can be changed by half

 

 

stop increments from 15 to 1/2000 second

 

 

when camera sensitivity is set to auto (p. 71).

 

 

If the shutter speed is beyond the aperture

 

 

range, the aperture display will blink on the

 

 

data panel and turn red on the monitors.

Camera Notes

For 35mm photographers, an aperture range of f/2.8 to f/8 does not seem impressive. However, because of the CCD size and the actual focal length of the lens, the apertures on this digital camera give significantly more depth of field at any given angle of view with any given aperture than a 35mm camera. So even with the minimum aperture of f/8, the depth of field will give the coverage needed to create beautiful, sharp images.

54ADVANCED RECORDING 55

Image 28
Contents Page Color Mode Before YOU BeginVivid Color increases Solarization produces a partialFor Proper and Safe USE Table of Contents 100 115 Names of Parts Camera BodyData Panel Exposure modes p Drive modes p Metering modes pWhite-balance indicator p Metering-mode indicator pMacro-mode indicator p Focus signal pGetting UP and Running Attaching the Lens HoodAttaching the Camera Strap Removing the Lens CAPBattery Condition Indicator Installing and Changing BatteriesAuto Power Save External Power Supplies Sold Separately Inserting and Changing a Memory CardSetting the Date and Time Camera notesSetting the Camera to Record Images Automatically Basic RecordingBasic Recording Operation EVF and LCD Monitor DisplayFocus Signals Special Focusing SituationsFocus Lock Automatic Monitor AmplificationUsing the BUILT-IN Flash Diopter AdjustmentFlash Range Automatic Operation Handling the CameraShooting tips DIGITAL-SUBJECT-PROGRAM ButtonSINGLE-FRAME Playback and Histogram Display Basic PlaybackDeleting Single Images Enlarged Playback Full display Image onlyViewing Images on a Television Viewing MoviesPlaying Back Voice Memos Display Controls Recording Mode Advanced RecordingSPOT-AE Lock Button PRO-AUTO ButtonManual Focus Autofocus Areas and Control Flex Focus PointMacro Mode Digital Zoom Setting the Function Dial Memory Storing Camera Settings Metering ModesExposure Modes Program PWhen a mode is selected, the aperture value on When S mode is selected, the shutter speed onWhen camera sensitivity is set to auto p Photographer selects the aperture and the camera setsBulb Exposures Attaching a Remote Cord Sold Separately