![](/images/new-backgrounds/1317861/31786123x1.webp)
G e t t i n g s t a r t e d
2.Connect the lead from the charger to the
socket at the back of the Nokia Image Frame
(1).
3.Connect the charger to an AC wall socket.
4.Set the Nokia Image
Frame on the table with the control keys
on the top. If most of your images are in the
upright position, you can turn the Nokia Image Frame upright so that the control keys are on the right side of the display.
Note: All radio transmitting devices send signals that may cause interference in different electronic devices (PC, television, etc.). To avoid interference, place the Image Frame far enough from other electronic devices.
You can turn the table support at the back to change the position angle of the Nokia Image Frame (2).
■Switching the power on and off
Press to switch on the Nokia Image Frame.
Note that if the SIM card is inserted and you switch the Image Frame on, the Image Frame automatically connects to the mobile network. Do not switch the Image Frame on when the SIM card is inserted, if the use of mobile devices (such as mobile phones) is prohibited.
Press to switch off the power.
Note that if the SIM card is full, it can take up to a minute before the Nokia Image Frame turns on and shows the first image.
Unplug the Nokia Image Frame when not in use.
12