U s i n g t h e N o k i a I m a g e F r a m e
■Modifying the display brightness
When the power is switched on, you can modify the brightness of the display by pressing briefly 
. There are five brightness levels, and each time you press 
, the level is raised by one. When the highest brightness level is used and you press 
, the Nokia Image Frame returns to the lowest brightness level.
■Sending an image from the Nokia Image Frame
When the power is switched on, select the image you want to send on the display of the Nokia Image Frame.
1.If needed, activate the IR port of the device to which you want to send an image.
2.Direct the IR ports of the Nokia Image Frame and the receiving compatible device toward each other, and ensure that there are no obstructions between the devices. The maximum allowed distance is up to 1.5 m and the transmission angle 15o.
3.Press 
and 
to send the image. The 
icon blinks while the Nokia Image Frame attempts to establish a connection to the
receiving device. During the image transfer the 
icon stops blinking. When the image is successfully sent, the Nokia Image Frame displays the 
icon.
■Receiving images with the Nokia Image Frame
When the power is switched on, the Nokia Image Frame can receive images. Note that the Nokia Image Frame converts the received images to display them. For more information, see ”Image format” on page 7.
The image receiving procedure differs depending on the sending device. If the sending device can send images over IR, you can send the selected images from the device while the Nokia Image Frame is in the passive IR reception mode. If image sending cannot be activated from the sending device, the Nokia Image Frame can pull all the images from the sending device’s default image folder using the active IR reception mode.
18