Keying in the PIN code, Configuring the MMS settings

G e t t i n g s t a r t e d

■Keying in the PIN code

If the PIN query is activated on the SIM card, the Nokia Image Frame displays the PIN query when the power is switched on.

Note: If you want to deactivate the PIN query, insert the SIM card to your phone and deactivate the PIN query as instructed in your phone’s user guide.

1.Press briefly or until the correct first number of the PIN code is highlighted.

2.Press briefly to select the number.

The * character appears on the display to indicate that the first number has been selected.

3.Select the rest of the numbers as in steps 1 and 2.

4.If the PIN code is correct, the Nokia Image Frame displays the

icon. If the PIN code is incorrect, the icon is displayed, and you have to key in the PIN code again.

■Configuring the MMS settings

If the MMS settings are preloaded to the Nokia Image Frame, you can skip this section unless you want to reconfigure the MMS settings. Check with your dealer if the MMS settings have been preloaded. If the settings are not preloaded and you want to receive images over MMS, you can configure the MMS settings by an over-the-air (OTA) message or SMS messages, as explained further below.

Note that many operators also offer a web-based OTA service for MMS settings. Check with your operator if this service is available.

If the configuration succeeds, the Nokia Image Frame displays the icon. If the configuration fails, the icon is displayed, and you have to send the configuration messages again.

English