Change mode, Change resolution, Record Video

In power-on state, when battery level is very low, the red icon on the bottom left of the screen will flash and the camera will turn off after one second. You must replace the batteries.

2.4Change mode

After powering on, the camera will always enter video record mode, press mode key to change mode between video record and capture.

In video record or capture mode, press left key or right to enter playback mode. Press Mode key to exit playback mode and return preview mode

2.5Change resolution

You can select High or Low resolution for recording videos or taking still pictures. Slide the Resolution Switch located on camcorder’s side and select desired position. LCD screen will display “Hi” or “Lo” indicating selected resolution.

2.6Record Video

In video record mode, press shutter key () to begin video recording, press the shutter key again to stop recording.

Press up key or down key to zoom in or zoom out the image. In playback mode, press Shutter key to start or stop video.