CHECKING BATTERY POWER
o~~ |
| ===~ |
I~C |
| |
FS.o |
| |
liD Ie_I | After approx. | |
~ | ( EJ | 16 sec. |
Slide power switch to ON and confirm indications on LCD panel.
With sufficient battery power, shutter speed and aperture indicators remain on for approx. 16 sec., unless you release shutter.
If indicators turn off immediately, replace battery.
e Even with sufficient battery power, shutter speed and aperture indicators go off approx. 2 sec. after you remove your finger from button, following shutter release.
e Lightly pressing the shutter release button, after exposure meter automatically turns off, turns exposure meter on again. With sufficient battery power, meter stays on for approx. 16 sec. after you remove your finger from the shutter release button.
e When not using the camera, be sure to turn power switch off, to conserve battery power.
e The battery operates camera motor. When
elf all indicators on LCD panel blink when you lightly press shutter release button, battery should be replaced.
e lf shutter does not operate and data does not appear on the LCD panel or viewfinder, the battery pack is exhaust- ed or improperly loaded.
12