Nokia 6108 manual AppendixA, Troubleshooting

Page 44

Appendix:A

Troubleshooting

When using the camcorder:

Problem

Cause

Solution

 

 

 

 

The battery is out of

Replace or recharge the

The camcorder can

power.

battery.

not be powered on

 

 

 

 

normally.

The battery are

Re-install the battery.

 

incorrectly installed.

 

 

 

 

 

The camcorder is

It may happen that

 

you move the Joystick

 

still powered on,

Move the Joystick toward left

toward left several times

but the LCD screen

again to regain display.

and thus turn off the

does not display.

 

display.

 

 

 

 

 

 

 

 

Free some space from the

 

Out of memory.

SD/MMC card or the internal

Can not take

 

memory.

 

 

pictures or video

The camcorder is

 

clips when pressing

Wait until the flash strobe is

recharging the flash

the Shutter or

fully charged.

strobe.

Record button.

 

 

 

 

Using a “protected” SD

Set the SD card to be

 

card.

writable.

 

 

 

The LCD screen

The format of the

 

displays “MEMORY

memory card is not

Use the camcorder “Format”

ERROR” or “CARD

compatible with the

function to format the card.

ERROR” message.

camcorder.

 

Or the camcorder

 

 

 

 

cannot read the

The memory card is

Replace the memory card

memory card.

corrupted.

with a new one.

 

 

 

42

Image 44
Contents English FCC Compliance Statement Welcome Table of Contents Using PC Camera Copying Files to Your PCAppendixA AppendixBGetting Started Knowing the camcorder partsLoading the battery Open the battery compartment coverInstall the battery Replace the coverBattery is being charged Charging the batteryConnect the power cable or USB cable to your camcorder Inserting a memory card optional Insert a memory cardThread the strap body through Loop Using the strap optionalThread the thin strap loop Through the hook Flipping the LCD panel Turning on/off your camcorderTurning off the camcorder Reading LCD indicators DV/DSC modePlayback mode MP3 mode Voice Recorder mode Setting language Setting clock and languageSetting clock Recording a video clip Set the strobe and selftimer if necessary Taking a still pictureSet the zoom as appropriate Press the Shutter button fully down to take a still picturePower on the camcorder and switch to Voice Recorder mode Recording a voice clipPower on the camcorder and switch to Playback mode Operations in playback modePlaying back your recordings Identify file typeSwitch the camcorder to Disk mode Playing MP3 musicCopy MP3 files to the camcorder Connect the camcorder to your PCPlaying music in MP3 mode Power on the camcorder and switch to MP3 modeOperations in MP3 mode Sorting MP3 filesAV Mode Viewing the display on a TVMenu operation Menu illustrationMenu items in DV/DSC mode Power-on → Press the Menu/OK buttonDSC items When enabled, you will be prompted to add Normal Take pictures in natural color Effect Menu items in Playback mode Menu items in MP3 mode Menu items in Voice Recorder mode PCMMenu items in Settings mode USBLanguage Set the OSD on screen display language Menu items in Settings mode Insert the driver CD Installing the driver to your PCStart the installation Install the driver Install codecsInstall Direct X 9.0c or above Restart the computerConnecting the camcorder to your PC Connect the other end USB cable to the camcorderFor Windows 2000/ME/98SE users Copying files to the PCFor Windows XP users Copying files to the PC Viewing/Playing files on your PC File location Switch the camcorder to PC Cam mode Starting the applicationLaunch the PC Camera program Troubleshooting AppendixAAppendixA Install Direct X 9.0c or Flicker Settings System MessageStorage Capacity Battery Life Indicator Battery LifeInstruction for ArcSoft MediaConverter System requirementsSupported file formats VideoConverting files Select media Select destination AppendixB Convert StepNow you can use the Playback AppendixC SpecificationsAppendixD System Requirements