Nokia 6108 manual Inserting a memory card optional, Insert a memory card

Page 9
Beveled corner

Inserting a memory card (optional)

In addition to the internal fl ash memory, your camcorder can also store data on a Secure Digital (SD) card or a MultiMedia card (MMC).

Insert a memory card:

To insert a memory card, fi rst open the cover on the bottom of the camcorder, and then gently push the card into the card slot as indicated until the card reaches the end of the slot.

Remove a memory card:

To remove the memory card, gently

push the memory card for the card to pop up. Then pull the card out of the slot.

Note: The SD card comes with a write-protect switch. When the write-protect switch is set to the Lock position, the card will become non-writable. To ensure that the camcorder can operate normally, you should set the write-protect switch to the Unlock position before inserting the SD card.

When a memory card is correctly inserted and detected, the card icon ( ) will display on the LCD screen.

Do not insert or remove the memory card while the camcorder is reading or writing data.

When a memory card is inserted, the camcorder will use the card as the main storage medium. Files stored in the built-in memory will become inaccessible until the memory card is removed.

If you purchase a new memory card, you are recommended to format the card with this camcorder before storing data into the card.

etting started

7

Image 9
Contents English FCC Compliance Statement Welcome Table of Contents Copying Files to Your PC Using PC CameraAppendixA AppendixBKnowing the camcorder parts Getting StartedOpen the battery compartment cover Loading the batteryInstall the battery Replace the coverCharging the battery Connect the power cable or USB cable to your camcorderBattery is being charged Insert a memory card Inserting a memory card optionalUsing the strap optional Thread the thin strap loop Through the hookThread the strap body through Loop Turning on/off your camcorder Turning off the camcorderFlipping the LCD panel DV/DSC mode Reading LCD indicatorsPlayback mode MP3 mode Voice Recorder mode Setting clock and language Setting clockSetting language Recording a video clip Taking a still picture Set the strobe and selftimer if necessarySet the zoom as appropriate Press the Shutter button fully down to take a still pictureRecording a voice clip Power on the camcorder and switch to Voice Recorder modeOperations in playback mode Power on the camcorder and switch to Playback modePlaying back your recordings Identify file typePlaying MP3 music Switch the camcorder to Disk modeCopy MP3 files to the camcorder Connect the camcorder to your PCPower on the camcorder and switch to MP3 mode Playing music in MP3 modeOperations in MP3 mode Sorting MP3 filesViewing the display on a TV AV ModeMenu illustration Menu operationPower-on → Press the Menu/OK button Menu items in DV/DSC modeDSC items When enabled, you will be prompted to add Normal Take pictures in natural color Effect Menu items in Playback mode Menu items in MP3 mode PCM Menu items in Voice Recorder modeUSB Menu items in Settings modeLanguage Set the OSD on screen display language Menu items in Settings mode Installing the driver to your PC Start the installationInsert the driver CD Install codecs Install the driverInstall Direct X 9.0c or above Restart the computerConnect the other end USB cable to the camcorder Connecting the camcorder to your PCCopying files to the PC For Windows XP usersFor Windows 2000/ME/98SE users Copying files to the PC Viewing/Playing files on your PC File location Starting the application Switch the camcorder to PC Cam modeLaunch the PC Camera program AppendixA TroubleshootingAppendixA Install Direct X 9.0c or System Message Flicker SettingsStorage Capacity Battery Life Battery Life IndicatorSystem requirements Instruction for ArcSoft MediaConverterVideo Supported file formatsConverting files Select media Select destination AppendixB Step ConvertNow you can use the Playback Specifications AppendixCSystem Requirements AppendixD