Olympus IS-1 manual Press the shutter release button halfway to focus

Page 16

autofocus frame

*Position your subject within the autofocus

frame in the center of the viewfinder.

*Press the shutter release button halfway to focus.

—When correct focus has been achieved, the auto- focus indicator will light-up in the viewfinder.

—If the autofocus indicator is blinking, correct focus has not been achieved. If this occurs, let go off the shutter release button. Make sure your subject is within the autofocus frame in the center of the

viewfinder and press the shutter release button

halfway again.

Both the LCD and viewfinder indicators will remain for about 30 seconds. When the indicators disappear, press the shutter release button halfway to resume.

— 15 —

Image 16

Contents Instructions Viewfinder Indicators Description of controls Zoom exposure Power Focus photographyManual flash operation Auto flash photography Symbols used in this manual Loading the batteries Page Loading the film Open the back cover by sliding the back cover releaseAlign the film leader with the film loading indicator Close the back cover Unloading the film Is displayed on the LCD panel while Reset operation Press the Mode button and + / button simultaneouslyHow to take pictures Press part a to remove the lens cap Set power switch onOr Wide angle Press the shutter release button halfway to focus Frame in the center of the viewfinderPage 0 ft Macro mode the shooting range0 ft 0.6 m 2.0 ft Holding the camera Auto flash photography Press the shutter release button fully to take the picture Auto flash range Color negative filmFocus lock Selftimer On the LCD panel will blink Position the subject for spot metering within Spot meteringSpot frame in the center of the viewfinder Modes Macro photography Button to select Telephoto macro 100 mmPage Continuous mode Double exposure mode Page Portrait zoom mode Press the shutter release button fully Half-length Full-length Size of Head-and-shoulder subject9.5 m Night scene mode Use this mode for night time shootingSlow-synchro fill-in flash Zoom memory mode Will blink on the LCD panel for 2.5 seconds, then disappear Auto-S flash photography Button until AUTO-S is displayed onCompose your shot and press the shutter release button fully Scene mode or Portrait zoom mode Fill-in flashPage Exposure mode switching Aperture-preferred auto mode While pressing the exposure Mode button Manual exposure modePress the shift button to set M Manual Exposure mode + Slight overexposure Exposure compensation Power Focus photography Press the button again to cancel PF Power Focus modeZoom exposure Press the Zoom button to set the focal lengthPage Manual flash operation Aperture setting color negative film How to take better pictures Effects of zoom and its advantages 70 mmAngle of view and depth of field Autofocus AF Subjects that are difficult to focus Program chart Standard photography mode Automatic exposure modeExposure Night scene mode Program chart portrait modeFill-in flash Light metering Measuring the amount of lightSpot metering Exposure compensation and film speed Fixed proper exposureExposure compensation Film speedFlash strength FlashHigh Function Flash G40 Optional Normal slow-synchro TeIe macro Wide macro= 40 cm optional How to attach the strap Adjust the length of the strap as desired Accessories optional IS/L Lens A-28Soft case a Troubleshooting Battery powerCamera does not work Displays disappeared while shootingCamera does not work in extremely cold weather Flash does not emitMy photos look like the film is cracked Care and Storage Specifications Viewfinder information Autofocus frame, spotExposure compensation + / 4 EV compensa Exposure counter Progressive type, displayed on LCD panelSelftimer Electronic selftimer with 12 sec. delay ManualDescription of controls LCD panel Olympus Corporation