Olympus IS-1 manual Zoom memory mode

Page 37

Zoom memory mode

Use Zoom memory mode to program the zoom lens to adjust to the most frequently

used focal length. Zoom memory mode can also be programmed for MACRO photography.

* Open the mode cover and press the SUBJECT		*By pressing the zoom button, set the lens at
button until	is displayed on the LCD panel.	the desired focal length.

*In the case of memorizing a desired focal length, press the zoom button to set the

desired position.

*In the case of memorizing a Macro mode

position, press the Macro button to set

either (Telephoto macro) or (Wide angle macro).

— 36 —

Image 37

Contents Instructions Viewfinder Indicators Description of controls Zoom exposure Power Focus photographyManual flash operation Auto flash photography Symbols used in this manual Loading the batteries Page Open the back cover by sliding the back cover release Loading the filmAlign the film leader with the film loading indicator Close the back cover Unloading the film Is displayed on the LCD panel while Press the Mode button and + / button simultaneously Reset operationPress part a to remove the lens cap Set power switch on How to take picturesOr Wide angle Frame in the center of the viewfinder Press the shutter release button halfway to focusPage 0 ft Macro mode the shooting range0 ft 0.6 m 2.0 ft Holding the camera Auto flash photography Auto flash range Color negative film Press the shutter release button fully to take the pictureFocus lock Selftimer On the LCD panel will blink Position the subject for spot metering within Spot meteringSpot frame in the center of the viewfinder Modes Button to select Telephoto macro 100 mm Macro photographyPage Continuous mode Double exposure mode Page Portrait zoom mode Press the shutter release button fully Half-length Full-length Size of Head-and-shoulder subject9.5 m Use this mode for night time shooting Night scene modeSlow-synchro fill-in flash Zoom memory mode Will blink on the LCD panel for 2.5 seconds, then disappear Button until AUTO-S is displayed on Auto-S flash photographyCompose your shot and press the shutter release button fully Fill-in flash Scene mode or Portrait zoom modePage Exposure mode switching Aperture-preferred auto mode While pressing the exposure Mode button Manual exposure modePress the shift button to set M Manual Exposure mode + Slight overexposure Exposure compensation Press the button again to cancel PF Power Focus mode Power Focus photographyPress the Zoom button to set the focal length Zoom exposurePage Manual flash operation Aperture setting color negative film How to take better pictures 70 mm Effects of zoom and its advantagesAngle of view and depth of field Autofocus AF Subjects that are difficult to focus Program chart Standard photography mode Automatic exposure modeExposure Night scene mode Program chart portrait modeFill-in flash Light metering Measuring the amount of lightSpot metering Fixed proper exposure Exposure compensation and film speedExposure compensation Film speedFlash strength FlashHigh Function Flash G40 Optional Normal slow-synchro TeIe macro Wide macro= 40 cm optional How to attach the strap Adjust the length of the strap as desired IS/L Lens A-28 Accessories optionalSoft case a Battery power TroubleshootingCamera does not work Displays disappeared while shootingCamera does not work in extremely cold weather Flash does not emitMy photos look like the film is cracked Care and Storage Viewfinder information Autofocus frame, spot SpecificationsExposure compensation + / 4 EV compensa Exposure counter Progressive type, displayed on LCD panelManual Selftimer Electronic selftimer with 12 sec. delayDescription of controls LCD panel Olympus Corporation