Olympus Infinity Stylus manual Align the film leader with the red film loading indicator

Page 10

Align the film leader with the red film loading indicator.

*Adjust the length of the film leader before loading so that it matches with the red loading indicator.

Make sure the film leader tip is not bent and the film perforations are properly aligned and engaged as shown.

Close the camera back firmly.

(Make sure the back cover lock

snaps down.)

9

Image 10

Contents Instructions Self-timer signal Flash mode buttonSelf-timer button Description of controlsClose-up Tripod socketTable of contents Symbols used in this manual Before you BatteryTery compartment cover tightly Page Use ISO 100 film Simple pointFilm is unavailable Open the back cover by slidingPrepare a DX film cartridge Insert the film cartridge into Align the film leader with the red film loading indicator Page Unloading the film Open the back cover after the motor has stopped Remove the film cartridge from the camera in the shadeHow to take pictures On the LCD panel. After 4.5 minutes, the LCD will go outPage Position your subject within Autofocus frame Shooting range From 0.35 m 1.1 ft. to- infinity Shake Flash mode is Auto flash photographyPage Auto flash Photography Light when shooting Peoples faces in close- up photographyControls Be careful of the flashsFocus lock When you want toUse the locus lock Page Self-timer photography Flash portraits and group photos Auto-S flashAuto-S flash significantly Reduces Red-eyeThis mode is to be used in situations where a OFF modeFlash AUTO-S mode shooting range Flash is prohibitedActivates in this mode Flash modeFlash always Press the flash mode button until FILL-IN appears on Fully to take the picture LCD panelUse Attaching the strapPage Troubleshooting Will the camera operate without film?Pictures arent sharp. Whats wrong? Care and storage Specifications Exposure counter Progressive type LCD panelBattery check Display on LCD Olympus America INC