Yamaha RX-V459 Using the remote control, Controlling the Tuner functions, Numeric buttons

Page 9

AMULTI CH IN

Selects the component connected to the MULTI CH INPUT jacks as the input source when using an external decoder, etc. (see page 36).

BCODE SET

Use to set up remote control codes (see page 80).

CSLEEP

Sets the sleep timer (see page 33).

DAMP

Sets the remote control to the operation mode of this unit.

EVOLUME +/–

Controls the output level of all audio channels.

Note

This does not affect the AUDIO OUT (REC) level.

FMUTE

Mutes the audio output. Press again to restore the audio output to the previous volume level (see page 31).

GSTRAIGHT

Turns the sound field programs off or on. When “STRAIGHT” is selected, 2-channel or multi-channel input signals are output directly from their respective speakers without effect processing (see page 36).

HNIGHT

Turns on or off the night listening modes (see page 31).

CONTROLS AND FUNCTIONS

JRadio Data System tuning buttons (U.K. and Europe models only)

FREQ/TEXT

Switches the Radio Data System display between the PS mode, PTY mode, RT mode, CT mode (if the station offers the corresponding data services) and the frequency display (see page 52).

PTY SEEK MODE

Sets this unit to the PTY SEEK mode (see page 50).

PTY SEEK START

Starts searching for a station once the desired program type is selected in the PTY SEEK mode (see page 51).

EON

Selects a program type (NEWS, AFFAIRS, INFO, or SPORT) for automatic tuning (see page 52).

■Using the remote control

The remote control transmits a directional infrared ray. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation.

INTRODUCTION

ISET MENU

Enters “SET MENU” (see page 68).

■Controlling the TUNER functions

Press TUNER to control the TUNER functions.

3Numeric buttons

Use numbers 1 through 8 to select preset stations.

6BAND

Switches the reception band between FM and AM (see page 43).

30 30

Notes

Approximately 6 m (20 ft)

7A/B/C/D/E j / i, PRESET/CH u / d

Press PRESET/CH u/ dto select a preset station group (A to E) and A/B/C/D/E j / i to select a preset station number (1 to 8) (see page 47).

•Do not spill water or other liquids on the remote control.

•Do not drop the remote control.

•Do not leave or store the remote control in the following types of conditions:

–places of high humidity, such as near a bath

–places of high temperatures, such as near a heater or stove

–places of extremely low temperatures

–dusty places

English

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents RX-V459 Special Instructions for U.K. Model For U.K. customersContents Features Installing batteries in the remote control Supplied accessoriesGetting Started Check that you received all of the following partsPRESET/TUNING l / h, Level +/- buttons Remote control sensorControls and Functions Front panelPhones Silent Cinema jack Front panel displaySpeakers A/B buttons BASS/TREBLE +/- buttonControlling this unit Remote controlB/C/D/E j / i, PRESET/CH u / d Using the remote controlControlling the Tuner functions Numeric buttonsFront panel display Night indicator Headphones indicatorHiFi DSP indicator Sleep indicatorAsia and General models only Rear panelPlacing speakers ConnectionsFront speakers a Right Left Surround speakers Connecting speakersFront CenterCenter terminals Front terminalsSurround terminals Surround Back terminalsConnecting the speaker cable Tighten the knob to secure the wireLoosen the knob Video jacks Audio jacksAudio and video signal flow Audio signal flow for Audio OUT RECVideo signal flow for Monitor OUT Connecting a TV Connecting a DVD player, a DVD recorder, a VCR or an STB Connecting a DVD playerDVD Player Connecting an STB Connecting a DVD recorder or a VCRDVD recorder or Cable TV receiver or Satellite receiverConnecting a CD player, an MD player or a tape deck CD PlayerMD recorder or tape deck Player Connecting a multi-format player or an external decoderOther lead wire to the GND terminal Connecting the AM loop antennaSet up the AM loop antenna Repeat steps 2 through 4 to connectConnecting the power cable Asia and General models onlyMemory back-up Make sure this unit is in the standby mode Setting the speaker impedanceFollowing display appears in the front panel display While holding DownTurning on the power Setting this unit to the standby mode Turning on this unit and setting it to the standby modeWhen all connections are complete, turn on this unit Remote control Front panelPress Enter to enter Basic Setup Basic SetupPress AMP on the remote control Press j / i to select the desired setting6spk Press Enter to confirm your selectionCheck OK? ..YES Press SET Menu to exit from Basic SetupPlayback Currently selected Input source Input modeTurn on the video monitor connected to this unit Available input sourcesCurrently selected sound Field program TrebleUsing Other Features Using Silent CinemaMuting the audio output Selecting the input mode DTSAnalog Using the sleep timer FlashesLights up Adjusting the speaker level Enhancer 2CH L R Selecting the Compressed Music Enhancer modeSelecting the Multi CH Input component Enjoying unprocessed input sourcesChannel stereo Enjoying pure hi-fi stereo sound Displaying the input source informationPlaying video sources in the background Enjoying multi-channel sources in surround Enjoying Surround SoundAuto Auto DecodersPRO Logic Enjoying 2-channel sources in surroundUsing Virtual Cinema DSP Recording Automatic tuning FM/AM TuningAuto indicator disappears from the front Press Tuning Mode AUTO/MAN’L so thatAs the input source Press PRESET/TUNING l / h to tune into Panel displayPress FM/AM to select FM as the reception band Automatic preset tuningFM appears in the front panel display Press and hold Memory MAN’L/AUTO FM for more than 3 secondsAutomatic preset tuning options Manual preset tuningSee pages 43 and 44 for tuning instructions Tune into a station automatically or manuallyPreset station number Selecting preset stationsRepeat steps 1 through 5 to store other stations Displayed station has been stored as C3Exchanging preset stations See Selecting preset stations onPress and hold Edit for more than 3 seconds Press Edit again A5FMPress PRESET/CH u / d on the remote Radio Data System Tuning Europe Models onlyProgram Control to select the desired program typePOP M Using the Radio Data System station networkDisplaying the Radio Data System information Frequency display Sound Field Programs Front panel operations Remote control operationsSelecting sound field programs Elements of a sound fieldFor movie/video sources Sound field program descriptionsStereo MusicMovie Theater For music sourcesSUR. Standard SUR. EnhancedSettings DSP Level Sound field parameter descriptionsINIT. DLY INIT.DLYLiveness S.LIVENESS SB Liveness Room Size P.ROOM Size S.ROOM Size SB RM SizeREV.TIME REV.DELAYDirect REV.LEVELCT Level SL Level SR LevelPanorama DimensionCT Width ImageMonaural Stereo Sound field program speaker layoutsNeo6 Cinema Neo6 Music SUR. Standard Dolby Digital PRO Logic DTSChannel audio 6.1-channel audio Monaural Stereo SET Menu Bmemory Guard Adisplay SETCPARAM. INI Dmulti ZonePress u / d to select Manual Setup and then press Enter Using SET MenuPress Enter to enter Manual Setup Press AMP and then press SET Menu to enter SET MenuPress SET Menu to exit from SET Menu Press i to increase the value Press j to decrease the valueFront speakers Front Speaker settings Aspeaker SETCenter speaker Center Surround left/right speakers SUR. LRSpeaker level B SP Level Subwoofer phase Swfr PhaseLFE/Bass out Bass OUT Crossover CrossoverSpeaker distance CSP Distance Center graphic equalizer Dcenter GEQLow-frequency effect level Elfe Level Audio settings Gaudio SET Dynamic range FD. RangeInput assignment DVD My DVD Use this menu to adjust the optional system parameters Display settings Adisplay SETSpeaker B setting SP B Parameter initialization CPARAM. INIPress the Program l / h buttons on Advanced SetupName of the selected parameter appears See page 77 for a complete list of available parametersFactory presets Preset Speaker impedance SP IMPTuner frequency step TU Asia and General models only Remote Control Features Controlling this unit, a TV, or other componentsControlling this unit Controlling a TV VCR Controlling other componentsSetting remote control codes Remote Control Code Default SettingsCategory Resetting the System Front panel to select PresetPress STANDBY/ON on the front panel to General TroubleshootingGoes off Sound suddenlySound is heard from Speaker on oneVolume level Or DTS indicatorOther settings of this Unit cannot be Changed Check SP Wires appears in the front panel displayTuner Remote controlAudio information GlossaryVideo information Virtual Cinema DSP Sound field program informationAudio Section SpecificationsDVD Player All rights reserved

RX-V459 specifications

The Yamaha RX-V459 is a versatile and powerful AV receiver that has become a popular choice among home theater enthusiasts. Known for its impressive features and sound quality, this model stands out in its category, making it an excellent addition to any audio setup.

One of the key features of the RX-V459 is its 7.1-channel surround sound capability. This means it can support up to seven speakers and a subwoofer, ensuring an immersive audio experience. The receiver delivers an impressive power output of 100 watts per channel, which is adequate for filling large rooms with high-quality sound. The RX-V459 also supports various surround sound formats, including Dolby Digital, DTS, and Pro Logic II, providing flexibility for different audio sources.

The RX-V459 includes Yamaha's proprietary YPAO (Yamaha Parametric room Acoustic Optimizer) technology. This innovative feature automatically analyzes your room's acoustics and adjusts the receiver settings for optimal sound performance. By using a provided microphone, YPAO determines the best speaker configuration and calibrates the audio settings accordingly, ensuring a balanced listening experience.

Another notable technology integrated into the RX-V459 is the extensive connectivity options it offers. The receiver is equipped with multiple HDMI inputs, allowing users to connect various devices like Blu-ray players, gaming consoles, and streaming devices easily. Additionally, the RX-V459 supports 1080p video pass-through, ensuring high-definition picture quality for a more enjoyable viewing experience.

Music lovers will appreciate the built-in support for various audio formats, including MP3, WMA, and AAC. The receiver also features a multi-zone functionality, allowing users to enjoy audio in different rooms of the home. This feature enables independent volume and source control, providing flexibility for simultaneous usage.

Furthermore, the RX-V459 incorporates a sleek design that complements modern home entertainment systems. Its clear LCD display and intuitive remote control make operation user-friendly. The receiver also comes with a range of listening modes, allowing users to customize their sound settings to suit different genres of music or movie content.

In conclusion, the Yamaha RX-V459 is an all-around excellent AV receiver that combines power, versatility, and advanced technology. With its capable surround sound processing, room calibration technology, and multiple connectivity options, it’s a solid choice for anyone looking to elevate their home audio and visual experience. Whether for movies, music, or gaming, the RX-V459 provides an enriched atmosphere that appeals to audiophiles and casual listeners alike.
Top Page Image Contents