Yamaha RX-V459 Sound suddenly, Goes off, Sound is heard from, Speaker on one, Side only, Speakers

Page 85

TROUBLESHOOTING

Problem

Cause

Remedy

See

page

 

 

 

The sound suddenly

The protection circuitry has been activated

Check that the speaker impedance setting is correct.

24

goes off.

because of a short circuit, etc.

 

 

Check that the speaker wires are not touching each

—

 

 

 

 

other and then turn this unit back on.

 

 

 

 

 

 

The sleep timer has turned off this unit.

Turn on this unit, and play the source again.

—

 

 

 

 

 

The sound is muted.

Press MUTE or VOLUME +/– on the remote control

31

 

 

to resume audio output.

 

 

 

 

 

Sound is heard from

Incorrect cable connections.

Connect the cables properly. If the problem persists,

17–23

the speaker on one

 

the cables may be defective.

 

side only.

 

 

 

Incorrect settings in “SPEAKER

Adjust the “SPEAKER LEVEL” settings.

71

 

 

LEVEL”.

 

 

 

 

 

 

Only the center

When playing a monaural source with a

 

 

speaker outputs

CINEMA DSP program, the source signal

 

 

substantial sound.

is directed to the center channel, and the

 

 

 

front and surround speakers output effect

 

 

 

sounds.

 

 

 

 

 

 

No sound is heard

“CENTER” in “SET MENU” is set to

Set “CENTER” to “SML” or “LRG”.

70

from the center

“NONE”.

 

 

speaker.

 

 

 

One of the HiFi DSP programs (except for

Try another sound field program.

54

 

 

6ch Stereo) has been selected.

 

 

 

 

 

 

No sound is heard

“SUR. LR” in “SET MENU” is set to

Set “SUR. LR” to “SML” or “LRG”.

70

from the surround

“NONE”.

 

 

speakers.

 

 

 

This unit is in the “STRAIGHT” mode

Press STRAIGHT (EFFECT) on the front panel so

36

 

 

and a monaural source is being played

that “STRAIGHT” disappears from the front panel

 

 

back.

display.

 

 

 

 

 

No sound is heard

“SUR. LR” in “SET MENU” is set to

Set “SUR. LR” and “SUR. B” to “SML” or “LRG”.

70

from the surround

“NONE” and “SUR. B” is automatically

 

 

back speaker.

set to “NONE”.

 

 

 

 

 

 

 

“SUR. B” in “SET MENU” is set to

Set “SUR. B” to “SML” or “LRG”.

70

 

“NONE”.

 

 

 

 

 

 

No sound is heard

“BASS OUT” in “SET MENU” is set to

Set “BASS OUT” to “SWFR” or “BOTH”.

71

from the subwoofer.

“FRNT” when a Dolby Digital or DTS

 

 

 

signal is being played.

 

 

 

 

 

 

 

“BASS OUT” in “SET MENU” is set to

Set “BASS OUT” to “BOTH”.

71

 

“SWFR” or “FRNT” when a 2-channel

 

 

 

source is being played.

 

 

 

 

 

 

The source does not contain low- frequency bass signals.

INFORMATION

ADDITIONAL

 

 

 

 

English

 

 

 

83

Page 84 Page 86
Image 85
Page 84 Page 86
Contents RX-V459 Special Instructions for U.K. Model For U.K. customersContents Features Installing batteries in the remote control Supplied accessoriesGetting Started Check that you received all of the following partsPRESET/TUNING l / h, Level +/- buttons Remote control sensorControls and Functions Front panelPhones Silent Cinema jack Front panel displaySpeakers A/B buttons BASS/TREBLE +/- buttonControlling this unit Remote controlB/C/D/E j / i, PRESET/CH u / d Using the remote controlControlling the Tuner functions Numeric buttonsFront panel display Night indicator Headphones indicatorHiFi DSP indicator Sleep indicatorAsia and General models only Rear panelPlacing speakers ConnectionsFront speakers a Right Left Surround speakers Connecting speakersFront CenterCenter terminals Front terminalsSurround terminals Surround Back terminalsTighten the knob to secure the wire Connecting the speaker cableLoosen the knob Video jacks Audio jacksAudio signal flow for Audio OUT REC Audio and video signal flowVideo signal flow for Monitor OUT Connecting a TV Connecting a DVD player Connecting a DVD player, a DVD recorder, a VCR or an STBDVD Player Connecting an STB Connecting a DVD recorder or a VCRDVD recorder or Cable TV receiver or Satellite receiverCD Player Connecting a CD player, an MD player or a tape deckMD recorder or tape deck Player Connecting a multi-format player or an external decoderOther lead wire to the GND terminal Connecting the AM loop antennaSet up the AM loop antenna Repeat steps 2 through 4 to connectAsia and General models only Connecting the power cableMemory back-up Make sure this unit is in the standby mode Setting the speaker impedanceFollowing display appears in the front panel display While holding DownTurning on the power Setting this unit to the standby mode Turning on this unit and setting it to the standby modeWhen all connections are complete, turn on this unit Remote control Front panelPress Enter to enter Basic Setup Basic SetupPress AMP on the remote control Press j / i to select the desired setting6spk Press Enter to confirm your selectionCheck OK? ..YES Press SET Menu to exit from Basic SetupPlayback Currently selected Input source Input modeTurn on the video monitor connected to this unit Available input sourcesCurrently selected sound Field program TrebleUsing Silent Cinema Using Other FeaturesMuting the audio output DTS Selecting the input modeAnalog Flashes Using the sleep timerLights up Adjusting the speaker level Enhancer 2CH L R Selecting the Compressed Music Enhancer modeEnjoying unprocessed input sources Selecting the Multi CH Input componentChannel stereo Enjoying pure hi-fi stereo sound Displaying the input source informationPlaying video sources in the background Enjoying multi-channel sources in surround Enjoying Surround SoundAuto Auto DecodersPRO Logic Enjoying 2-channel sources in surroundUsing Virtual Cinema DSP Recording Automatic tuning FM/AM TuningAuto indicator disappears from the front Press Tuning Mode AUTO/MAN’L so thatAs the input source Press PRESET/TUNING l / h to tune into Panel displayPress FM/AM to select FM as the reception band Automatic preset tuningFM appears in the front panel display Press and hold Memory MAN’L/AUTO FM for more than 3 secondsAutomatic preset tuning options Manual preset tuningSee pages 43 and 44 for tuning instructions Tune into a station automatically or manuallyPreset station number Selecting preset stationsRepeat steps 1 through 5 to store other stations Displayed station has been stored as C3See Selecting preset stations on Exchanging preset stationsPress and hold Edit for more than 3 seconds Press Edit again A5FMPress PRESET/CH u / d on the remote Radio Data System Tuning Europe Models onlyProgram Control to select the desired program typePOP M Using the Radio Data System station networkDisplaying the Radio Data System information Frequency display Sound Field Programs Front panel operations Remote control operationsSelecting sound field programs Elements of a sound fieldFor movie/video sources Sound field program descriptionsStereo MusicMovie Theater For music sourcesSUR. Standard SUR. EnhancedSettings DSP Level Sound field parameter descriptionsINIT. DLY INIT.DLYLiveness S.LIVENESS SB Liveness Room Size P.ROOM Size S.ROOM Size SB RM SizeREV.TIME REV.DELAYDirect REV.LEVELCT Level SL Level SR LevelPanorama DimensionCT Width ImageMonaural Stereo Sound field program speaker layoutsNeo6 Cinema Neo6 Music SUR. Standard Dolby Digital PRO Logic DTSChannel audio 6.1-channel audio Monaural Stereo SET Menu Bmemory Guard Adisplay SETCPARAM. INI Dmulti ZonePress u / d to select Manual Setup and then press Enter Using SET MenuPress Enter to enter Manual Setup Press AMP and then press SET Menu to enter SET MenuPress SET Menu to exit from SET Menu Press i to increase the value Press j to decrease the valueFront speakers Front Speaker settings Aspeaker SETCenter speaker Center Surround left/right speakers SUR. LRSpeaker level B SP Level Subwoofer phase Swfr PhaseLFE/Bass out Bass OUT Crossover CrossoverCenter graphic equalizer Dcenter GEQ Speaker distance CSP DistanceLow-frequency effect level Elfe Level Dynamic range FD. Range Audio settings Gaudio SETInput assignment DVD My DVD Use this menu to adjust the optional system parameters Display settings Adisplay SETSpeaker B setting SP B Parameter initialization CPARAM. INIPress the Program l / h buttons on Advanced SetupName of the selected parameter appears See page 77 for a complete list of available parametersSpeaker impedance SP IMP Factory presets PresetTuner frequency step TU Asia and General models only Controlling this unit, a TV, or other components Remote Control FeaturesControlling this unit Controlling a TV VCR Controlling other componentsRemote Control Code Default Settings Setting remote control codesCategory Front panel to select Preset Resetting the SystemPress STANDBY/ON on the front panel to General TroubleshootingGoes off Sound suddenlySound is heard from Speaker on oneVolume level Or DTS indicatorOther settings of this Unit cannot be Changed Check SP Wires appears in the front panel displayTuner Remote controlAudio information GlossaryVideo information Virtual Cinema DSP Sound field program informationAudio Section SpecificationsDVD Player All rights reserved

RX-V459 specifications

The Yamaha RX-V459 is a versatile and powerful AV receiver that has become a popular choice among home theater enthusiasts. Known for its impressive features and sound quality, this model stands out in its category, making it an excellent addition to any audio setup.

One of the key features of the RX-V459 is its 7.1-channel surround sound capability. This means it can support up to seven speakers and a subwoofer, ensuring an immersive audio experience. The receiver delivers an impressive power output of 100 watts per channel, which is adequate for filling large rooms with high-quality sound. The RX-V459 also supports various surround sound formats, including Dolby Digital, DTS, and Pro Logic II, providing flexibility for different audio sources.

The RX-V459 includes Yamaha's proprietary YPAO (Yamaha Parametric room Acoustic Optimizer) technology. This innovative feature automatically analyzes your room's acoustics and adjusts the receiver settings for optimal sound performance. By using a provided microphone, YPAO determines the best speaker configuration and calibrates the audio settings accordingly, ensuring a balanced listening experience.

Another notable technology integrated into the RX-V459 is the extensive connectivity options it offers. The receiver is equipped with multiple HDMI inputs, allowing users to connect various devices like Blu-ray players, gaming consoles, and streaming devices easily. Additionally, the RX-V459 supports 1080p video pass-through, ensuring high-definition picture quality for a more enjoyable viewing experience.

Music lovers will appreciate the built-in support for various audio formats, including MP3, WMA, and AAC. The receiver also features a multi-zone functionality, allowing users to enjoy audio in different rooms of the home. This feature enables independent volume and source control, providing flexibility for simultaneous usage.

Furthermore, the RX-V459 incorporates a sleek design that complements modern home entertainment systems. Its clear LCD display and intuitive remote control make operation user-friendly. The receiver also comes with a range of listening modes, allowing users to customize their sound settings to suit different genres of music or movie content.

In conclusion, the Yamaha RX-V459 is an all-around excellent AV receiver that combines power, versatility, and advanced technology. With its capable surround sound processing, room calibration technology, and multiple connectivity options, it’s a solid choice for anyone looking to elevate their home audio and visual experience. Whether for movies, music, or gaming, the RX-V459 provides an enriched atmosphere that appeals to audiophiles and casual listeners alike.
Top Page Image Contents