Light & Motion VX2000 manual Assembly with Universal Mounts, Connecting Battery to Light Head

Page 11

Mounting Light Head QuickConnect

1)Remove the attached arm mount using a 1/8 allen wrench.

2)Align QuickConnect details with slots on light head.

3)Tighten Socket Cap Screw to secure mount to light head.

Mounting QuickConnect Base

1)Remove arm base using 5/32 allen wrench.

2)Attach QuickConnect and tighten Socket Cap Screw.

Attaching Light Arm to Light and Housing

1)Align arm mounts into slots on light or housing base.

2)Push slightly and rotate clockwise. Arm should click into place.

Removing Light Arm from Light Head and Housing (ref. fig. 22)

1)Pull lock ring away from light or housing and rotate counter-clockwise.

(Fig. 22)

(Fig. 23)

(Fig.24)

Light Head

Base

(Fig. 25)

(Fig. 26)

 

 

 

 

(Fig.27)

Assembly with Universal Mounts

Mounting Arm to Light Heads

Align top of arm with arm light head base and press FIRMLY together. Arm should snap into position. (ref. fig. 25).

Removing Arm from Light Heads

To remove light head from arm, “break” the arm at the upper most joint. Applying pressure on the Light Arm and not the Light Head (ref. fig. 9). Do not apply pressure to the Light Head Base (ref. fig. 26). Doing so may cause the Base to break from the Light Head damaging the light.

Connecting Battery to Light Head

1)Plug in the cable connectors on pod.

2)Tighten the locking sleeves by rotating clockwise until tight.

1)Plug in the cable connectors on the Light Head

2)Tighten the locking sleeves by rotating clockwise until tight.

20

21

Image 11
Contents Bluefin Welcome Table of ContentsMounting Screw Getting Started Housing Identification Quick Start GuideRear Plate Bluefin VX2000 Operation Camera PreparationMounting the Camera OperationFront Plate Housing ControlUsing the Bluefin VX2000 in Camcorder mode Using the Bluefin VX2000 in VTR mode Rear Plate LED signalsUsing the Bluefin VX2000 in Memory Stick mode Ring Care & Maintenance Front Optic Installation / RemovalPre-Dive Checklist Housing StorageReplacing Handle Batteries Using Manual FocusFocus Techniques Reversing Smart Grip left and right functionality Bluefin VX2000 Lights Getting StartedCharging Batteries Installing BatteriesMounting Battery Pods Installing and Using QuickConnectsConnecting Battery to Light Head Assembly with Universal MountsStorage Post Dive CleaningOther Maintenance Light OperationMonitor Instructions Getting Started Bluefin Bulkhead InstallationMonitor Operation Bluefin Compact Monitor ID and OperationExternal Monitor consists of three components Monitor CableDiving Without a Monitor Attached Power On/Off with Remote MonitorRemote Monitor ID and Operation Charging the Remote MonitorContact Light & Motion Returning Products for CareCannery Row Monterey, CA