Kodak M1093 IS Face Detect Capture, Exposure Metering, AF Zone, ISO Speed Auto, Sharpness High

Doing more with your camera

Press Menu,		,		,	Capture + Options
and OK to	access		settings

Face Detect Capture

Choose if faces get focus priority.

On—In P mode (and in SCN modes designed for pictures of people), the camera attempts to focus on faces.

Off

	NOTE: Not available in Smart Capture mode (because face detection
	is always on). To change focus from the selected face to
	another face, press	.
Exposure Metering	Multi-Pattern—evaluates lighting conditions throughout
Evaluate light levels at specific	the image to give an optimum picture exposure. Ideal for
areas of a scene.	general picture taking.
	Center-Weight—evaluates the lighting conditions of the
	subject centered in the lens. Ideal for backlit subjects.
	Center-Spot—similar to Center-weight, except the metering
	is concentrated on a smaller area of the subject centered in the
	lens. Ideal when you need an exact exposure of a specific area
	in the picture.
AF Zone	Multi-Zone—evaluates 5 zones to give an even picture
Select a large or concentrated	focus. Ideal for general picture taking.
area of focus.	Center-Zone—evaluates the small area centered in the lens.
	Ideal when you need precise focus.
ISO Speed	Auto
Control the sensitivity of the	ISO 64, 100, 200, 400, 800, 1600, 3200, 6400 (ISO 6400
camera sensor.	available for picture sizes of 3.1 MP or less.)
Sharpness	High
Control picture sharpness.	Normal
	Low

30 www.kodak.com/go/support