Kodak M1093 IS manual Camera problems, Status Solution

6

Troubleshooting

IMPORTANT: Your camera offers an on-board Help system. To get the most from your camera, see page 49.

Camera problems

	Status	Solution
	Camera does not	■ Make sure the battery is charged and installed correctly (see
	turn on	page 1).
	Camera does not turn	■ Turn the camera off, then on again.
	off
	Camera buttons and
	controls do not
	function
	In Review, a blue or	■ Transfer all pictures to the computer (see page 37).
	black screen is	■ Take another picture.
	displayed instead of
	a picture
	Pictures remaining	■ Continue taking pictures. The camera is operating normally.
	number does not	(The camera estimates the number of pictures remaining after each
	decrease after taking a	picture is taken, based on picture size and content.)
	picture
	Flash does not fire	■ Check the flash setting, and change as needed (see page 7).
		NOTE: The flash does not fire in all modes.
	Memory card is almost	■ Transfer the pictures to the computer (see page 37).
	or entirely full	■ Delete pictures from the card or insert a new card.
	The battery does not	■ See page 2 or visit www.kodak.com/go/USBcharging.
	charge using USB	■ Insert a new battery (see page 1).
	charging
www.kodak.com/go/support			45