Kodak M1063, MD1063, MX1063 manual Viewing on a television using an A/V cable

Working with pictures/videos

Viewing on a television using an A/V cable

You can display pictures/videos/slide shows on a television, computer monitor, or any device equipped with a video input. To connect the camera to a television, use an A/V (audio/video) cable (may be sold separately), then see page 14 or page 21.

NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see page 33). The slide show stops if you connect/disconnect a cable while the slide show is running. (Image quality on a television screen may not be as good as on a computer monitor or when printed.)

1Turn off the camera.

2Connect the A/V cable.

3Turn on the camera.

4View pictures/videos/slide shows on television.

CAUTION:

Turn off the camera before connecting/disconnecting the A/V cable.

Failure to do so may cause damage to the camera, pictures, or memory card.

24 www.kodak.com/go/support