Kodak MX1063, M1063, MD1063 manual Turn on the flash see

Troubleshooting

If...	Try one or more of the following
Picture is too dark.	■ Turn on the flash (see page 8).
	■ Move so that the distance between you and the subject is within the
	effective flash range (see page 54).
	■ Use Fill flash (page 8) or change your position so light is not behind
	the subject.
	■ Increase Exposure Compensation (see page 35).
Camera does not	■ Purchase a certified SD/SDHC card.
recognize SD card.	■ Reformat the card (see page 34).
	Caution: Formatting a card deletes all pictures and videos,
	including protected files.
	■ Insert a card into the slot, then push to seat (see page 4).
Camera freezes up	■ Turn the camera off, then back on.
when a card is	■ Make sure the camera is turned off before inserting or removing a
inserted or
	card.
removed.
	■ Try another SD/SDHC card.
Memory card full.	■ Insert a new card (see page 4), transfer pictures to the computer (see
	page 37), or delete pictures (see page 17).
Memory card and	■ Transfer pictures to the computer (see page 37), then format the card
internal memory	or internal memory (see page 34).
full.	Caution: Formatting a card deletes all pictures and videos,
	including protected files.

www.kodak.com/go/support 47