Kodak M1063, MD1063, MX1063 manual Camera/computer communications, LCD screen messages

Troubleshooting

Camera/computer communications

If...	Try one or more of the following
The computer does	■ Turn on the camera (see page 3).
not communicate	■ Make sure the battery is fully charged (see page 2).
with the camera.	■ Connect the USB cable to camera and computer port (see page 37).
	■ Install the software (see page 36).
	■ Disconnect the USB cable. Close all software applications. Re-install
	the software (see page 36).
	■ Disconnect camera from the computer. Close all software applications,
	reconnect camera.
Cannot transfer	■ Disconnect the USB cable. (If using camera dock or printer dock,
pictures.	disconnect cable and remove camera from dock). Close all open
(The Add New	applications. Re-install the software (see page 36).
	■ Disconnect the USB cable. Close all software applications. Re-install
Hardware Wizard
cannot locate	the software (see page 36).
drivers.)	■ Reboot the computer.
	■ Try another computer.
Slide show stops or	■ Adjust the camera Video Out setting NTSC or PAL (see page 33).
does not run on an	■ Make sure the external device settings are correct. (See the device’s
external video	user’s guide.)
device.
LCD screen messages

If...	Try one or more of the following
No pictures or	■ Change image storage location setting (see page 32).
videos to display

48 www.kodak.com/go/support