Kodak LS753 manual Picture quality problems

		Troubleshooting
If...	Try one or more of the following
Slide Show does not	■	Adjust the camera Video Out setting (NTSC or PAL,
run on an external		page 20).
video device	■	Make sure the external device settings are correct
		(see the device’s user’s guide).
Picture quality problems
If...	Try one or more of the following
The picture is too dark	■	Use Fill flash (page 14) or change your position so light is
or underexposed		not behind the subject.
	■	Move so that the distance between you and the subject is
		within the effective flash range (see page 14).
	■	To automatically set exposure and focus, press the Shutter
		button halfway and hold. When the ready light glows
		green, press the Shutter button completely down to
		take the picture.
	■	Increase Exposure Compensation (page 16) and try again.
The picture is too light	■	Turn flash off (page 14).
	■	Move so that the distance between you and the subject is
		within the effective flash range (see page 14).
	■	To automatically set exposure and focus, press the Shutter
		button halfway and hold. When the ready light glows
		green, press the Shutter button completely down to
		take the picture.
	■	Decrease Exposure Compensation (page 16)
		and try again.
	■	Check if you are in Beach or Snow scene mode (page 10).
The picture is not clear	■	To automatically set exposure and focus, press the Shutter
		button halfway and hold. When the ready light glows
		green, gently press the Shutter button completely down
		to take the picture.
	■	Clean the lens (page 49).
	■	Make sure camera is not in Close-up mode if you are
		further than 39 in. (100 cm) from your subject.
	■	Place the camera on a flat, steady surface or use a tripod.

41