Kodak LS753 manual Charging the battery, Loading the battery, Insert the battery into the charger

Getting started

Charging the battery

Charge the Li-Ion rechargeable battery before first use.

1 2 3

1Insert the battery into the charger.

2Insert the plug that matches your electrical outlet.

3Plug the charger into the outlet.

Red = charging Green = fully charged

3 hours or less

4Remove the battery and unplug the charger when the light turns green. Charging takes approximately 3 hours.

For expected battery life, see page 3.

You can also charge the battery using an optional Kodak EasyShare printer dock or camera dock. Purchase these and other accessories at a dealer of Kodak products or visit www.kodak.com/go/accessories.

Loading the battery

CAUTION:

Use only a Kodak EasyShare Li-Ion rechargeable battery (KLIC-5000) and orient it as shown.

NOTE: When you remove the battery, make sure the camera is turned off.

1	Open the battery door.
2	Orient the battery as shown, and push it in.
3	Close the battery door.
4	To remove, slide the release tab and pull the
	battery out.
release tab
2