Kodak CX7310 manual Status Cause Solution

			Troubleshooting
Message	Cause		Solution
Camera error #XXXX.	An error is detected.		Turn the Mode dial off, then back
See user’s guide.			on. If the message reappears,
			contact Customer Support
			(page 37).
Camera ready light status
Status	Cause	Solution
Ready light does not	Camera is not turned on.	Turn on the camera (page 4).
turn on and the
	Batteries are exhausted	Install new batteries (page 2) or
camera does not
	or are not charged.	charge rechargeable batteries.
work.
	Mode dial was on when	Turn Mode dial off, then back on.
	batteries were reloaded.
Ready light blinks	Picture is being	Camera is operating normally.
green.	processed and saved to
	the camera.
Ready light blinks	Flash is not charged.	Wait. Resume picture taking when
amber.		the light stops blinking and turns
	Camera is initializing.
		green.
Ready light blinks red	Batteries are low or	Install new batteries (page 2) or
and camera turns off.	exhausted.	charge rechargeable batteries.
Ready light glows	Camera’s internal	Transfer pictures to the computer
steady red.	memory or card is full.	(page 28), delete pictures from the
		camera (page 18), switch image
		storage locations (page 13), or insert
		a card with available memory
		(page 7).
	Camera processing	Wait. Resume picture taking when
	memory is full.	the light turns green.
	Card is read-only.	Change the image storage location
		to internal memory (page 13), or use
		a different card.
Ready light glows	Camera is on; ready to	Camera is operating normally.
steady green.	take a picture or video.

www.kodak.com/go/support 36