Kodak CX6330 manual Connecting the Camera Dock, Into a power outlet

Chapter 9

Connecting the Camera Dock 6000

After the Kodak EasyShare software is loaded (see page 57), connect the camera dock to your computer and to a power outlet. You need:

mThe USB cable included with your camera

mThe 5-volt AC adapter included with the camera dock

IMPORTANT: Make sure your camera is NOT in the camera dock when you are connecting to power and the computer.

1Plug the labeled end of the USB cable into the labeled USB port on your computer.

See your computer user’s guide for details.

2 Plug the other end of the USB cable into the square USB connector on the back of the camera dock.

3Plug the AC adapter into the round power connector on the back of the camera dock

and into a power outlet.

Your AC adapter may differ from the one pictured or may have additional plugs. Use the plug that accommodates your type of power outlet.

CAUTION:

Use only the 5-volt AC adapter included with the camera dock 6000. Other adapters may cause damage to your camera, camera dock, or AC adapter.

Leave the camera dock connected so it’s always ready to transfer pictures and videos.

65