Kodak CX6330 Installing the Custom Camera Insert, Remove the Universal Insert, Snap it into place

Chapter 9

Installing the Custom Camera Insert

A universal insert is pre-installed in the camera dock. It allows all Kodak EasyShare CX/DX6000 series and LS600 series cameras to use the camera dock.

A custom insert is included with your camera. It provides a perfect fit for the Kodak EasyShare CX6330 zoom digital camera.

Remove the Universal Insert

1Place your thumbs against the front of the universal insert. Press in and lift.

2Lift the side edge of the insert, then remove

the insert from the dock.

3 Save the universal insert as a spare.

Install the Custom Insert

Cutout 1	Position the custom insert so that the cutout
	lines up with the camera dock connector.
2	Fit the insert into the groove in the dock.
	Snap it into place.
	To order a custom insert, visit
	www.kodak.com/go/cx6330accessories.
Connector

64