Maytag 6 915513 A lbolsNecessaryforInstallation, Uncrating, CabinetPreparation

lbolsNecessaryforInstallation*

........................................................

0 Cutting Knife

0 Ratchet

0 3/16”,1/4”, 5/16” Sockets

0 Phillips Screwdriver

0Standard Screwdriver

0Wire Cutters

0Crescent Wrench

0	Adjustable Pliers	*(Not included:	Tools	required for
0	Level	preparing the	cabinet	opening).

Support Accessories:

0314” UL App roved Strain Relief (provided)

02 Appropriate Sized Wire Nuts

03/8” Male (N.ET.) C om pression Elbow or Flare Elbow

0Thread Sealing Tape or Pipe Thread Compound

0Appropriate Sized Hose Clamp

(1 3 Wood Mounting Screws (provided)

0Drain Hose Retainer (provided)

Water Hook-Up Kits Available:

(Water line, water valve fitting, TeflonTM tape, tee valve fitting)

5’	Braided Stainless Steel	Part	#19950153
5’	Copper	Part	#19950152

Available through an authorized Maytag Parts Retailer

NOTE: Make sure you have everything necessary for proper installation before going to step 2.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Uncrating

..................

@ Remove accessand toe panels before beginning installation.

Q Remove bolts from the crate base brackets, using 5/16” socket with ratchet. Remove crate base and discard base and packaging. Until dishwasher is permanently installed, beware of opening the door as the unit may tip forward.

QL oosen front leg bolts with a crescent wrench. Adjust rear leg bolts in same manner.

CAUTION: With the door open, dishwasher may tip forward if it is not secure in position to cabinet.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CabinetPreparation

....................................

Prepare	cabinet as needed. Electrical		and water facilities	should enter	cabinet	opening on	the floor,	or through the
back or	side walls, as shown	in the	shaded portion of the drawing. Preferred			drain outlet	is shown	in the lower
portion of the cabinet in drawing below. CBre should				cabinet	opening		dishwasher dimensions
be taken	to route plumbing	away from the motor.
DO NOT make connections until dishwasher is in
position. Care should be taken to make sure cabinet
bolesfor	power cord and hoseshave no sha? edges.

CUSTOM PANELS AVAILABLE

Dishwashers come with pre-installed panels. Custom panels are available: stainless steel and trims kits for wood panels. See your authorized selling dealer for a complete list of products available.

3