Kodak DC280, DC240 manual Selecting a White Balance for Indoor Pictures

Set the Mode dial to Capture.

Selecting a White Balance for Indoor Pictures

If you are using your camera indoors where flash is prohibited, your pictures may take on a green tint if captured under fluorescent tube lighting, or a reddish-orange tint if captured under tungsten household lighting. You can correct this problem using the White Balance feature on the camera. Use the Auto setting for everyday pictures. Use the Daylight, Fluorescent, or Tungsten setting for taking pictures under these lighting conditions without flash.

1

2 Slide the POWER switch to the right to	3
turn on the camera.

3 Press the MENU button.

The LCD displays the main Menu screen.

4 Press a / button until the icon is highlighted.

5 Press the DO-IT button.

The LCD displays the White Balance screen.

The current setting is checked ().

6Press a / button until the White Balance option you want is highlighted.

θAuto (No Icon)—automatically adjusts the white balance.

θ Daylight—balances for natural

daylight lighting.

θ Fluorescent—corrects for the green

cast of fluorescent lighting.

θ Tungsten—corrects for the orange cast of tungsten light bulbs.

7 Press the DO-IT button.

T W

The main Menu screen reappears as the White Balance icon you selected appears in the Status Display.

Your camera automatically resets to Auto when the camera is turned off.

27