Kodak DC240, DC280 manual Using the Battery Charger

Page 10

Using the Battery Charger

To ensure that you have a constant supply of freshly charged batteries, a battery charger and four AA Ni-MH rechargeable batteries are provided with some DC240/DC280 cameras. These batteries need to be charged before using and take up to eight hours to fully charge. So you are always prepared to take pictures, keep one set of rechargeable batteries in the camera, and an extra set charged, ready for use. You can purchase additional KODAK Ni-MH Rechargeable Batteries as an accessory. For details about available accessories, ask your dealer of Kodak products, or visit our Website at http://www.kodak.com/go/accessories.

1Verify that you are loading Ni-MH or

Ni-Cd rechargeable batteries. If they are any other type, do not load them into the charger.

This charger is for charging Ni-MH or Ni-Cd batteries only, with a maximum of 4 cells, and a maximum charge of 1450mAH.

Do not charge nonrechargeable batteries.

2Align the positive and negative ends of the batteries with the positive and negative contact points in the charger.

3Insert the batteries into the charger until the batteries snap in place.

4Plug the charger into a power outlet.

Depending on where you live, some battery chargers are supplied with power plugs that are not attached to the charger. If you have that type of charger, use the plug that matches your power outlet.

5Verify that the charge indicator lights on the charger turn on. If the lights do not turn on, verify that the batteries are inserted correctly.

Batteries are fully charged when the charge indicator lights on the charger turn off, or after 8 hours of charging.

6Unplug the charger and remove the batteries when charging is complete.

4

Page 9 Page 11
Image 10
Page 9 Page 11
Contents User’s Guide Page Table of Contents Customizing Your Pictures Installing Your Software Where to Get Help Getting Started Loading Batteries Preparing to Take PicturesTurning the Camera On and Off Checking Batteries Using the Battery Charger Using an AC Adapter Inserting a Camera Memory Card Removing a Camera Memory CardSetting the Clock on Your Camera Main Camera Setup screen appearsAdjusting the LCD Brightness Taking Pictures Previewing a Picture Before it is Taken Pressing the Shutter Button Zooming in on Your Subject LCD displays the Delete Picture screen Setting a Quickview for Each PictureViewing the Picture Just Taken Picture is permanently deleted from the camera memory cardMain Menu screen reappears Setting the Flash Flash setting icon changes in the Status DisplayPhotographing Distant Subjects Infinity Focus icon appears in the Status DisplayPhotographing Close-Ups Self-timer icon appears in the Status Display Putting Yourself in the PictureLCD displays the main Menu screen Current setting is checked Adding the Date to Your Pictures LCD displays the Date Stamp screenDeleting the Picture Just Taken Customizing Your Pictures Adjusting the Camera Exposure LCD displays the Exposure Compensation screenFPO Adding a Border to Your PictureCapturing in Black-and-White, Sepia Tone, or Document Adjusting the Picture Quality Adjusting the Picture Resolution Selecting a White Balance for Indoor Pictures Choosing a Metering System Adjusting the ISO Setting DC280 only LCD displays the Auto ISO screen Current setting is Sharpening and Softening a Picture Locking in an Exposure Setting Page Reviewing Your Pictures Viewing Your Pictures Last picture taken appears on LCD screen Magnifying Your PicturesLCD displays a magnified view of the selected picture Main Review Menu screen appears Selecting Pictures for PrintingLast picture taken appears on Print Order screen appearsCancelling Pictures for Printing Cancel CURRENT-cancelsProtect screen appears Protecting Your PicturesPicture appears on the LCD with Protect icon Delete screen appears Deleting One or All of Your PicturesPictures are deleted from the camera memory card Running a Slide Show on Your Television Slide Show Interval screen appearsViewing Information About a Picture Page Personalizing Your Camera Setting a Response Beep Beep screen appears. The current setting is checked Saving Camera Power Power Save screen appears. The current Setting is checked About screen appears Viewing Camera InformationFirmware Version-displays Main Camera Setup screen reappears Language screen appears. The current Setting is checked Selecting a Language for the Camera Formatting Your Camera Memory Card Format Memory Card screen appearsAdjusting the Video Out Signal Video Out screen appears. The current setting is checked Setting a Border Default Adjusting the Camera Default SettingsBorders Default screen appears. Setting a Flash Default Flash Default screen appears. Current setting is checked White Balance Default screen appears Setting a White Balance DefaultAuto Main Default-adjusts Exposure Compensation Default Setting an Exposure Compensation DefaultScreen appears Effects Default screen appears. Setting an Effect DefaultNo Effect Main Default-captures Setting an Auto ISO Default DC280 only OFF Main Default-cameraPage Windows-Based System Requirements Macintosh System RequirementsKodak Software for Windows-Based Computers Software OverviewKodak Software for Macintosh Computers Page Connecting Your Camera Using a Serial Cable Connection Connecting to a Windows-Based ComputerConnecting to a Macintosh Computer Using a USB Cable Connection Opening Mounter Software Opening Digital Access Software Twain AcquireStarting the Kodak Software for Windows-Based Computers Opening Camera Controls SoftwareOpening Picture Transfer Application Opening Digital Access Software Plug-In AcquireStarting the Kodak Software for Macintosh Computers Picture Transfer icon appearsNavigating to Your Pictures Page Connecting with Your Camera Communicating with the Computer Adjusting Your Monitor for Better ViewingGetting Better Results from Your Printer Computer Monitor Problem Cause Solution TroubleshootingCamera Memory Card Problem Cause Solution Camera Communications Problem Cause Solution Camera Problem Cause Solution Camera Problem Cause Solution Camera Problem Cause Solution Camera Problem Cause Solution Camera Problem Cause Solution LCD Messages Cause Solution Software Help Online ServicesFaxed Information Customer Support Country Help number FaxCountry Help number Fax Page Warranty Time Period Warranty Repair CoverageLimitations How to Obtain Service Application SupportFCC Compliance and Advisory Regulatory InformationCanadian DOC Statement Original Camera Default Settings Feature SettingDC240 Camera Specifications DC240 CameraDC280 Camera Specifications DC280 CameraGeneral Maintenance and Safety Using Your Batteries Attempt to recharge them in the battery chargerBattery Charger Tips Index Page Page Page

DC280, DC240 specifications

The Kodak DC240 and DC280 were two influential digital cameras released in the late 1990s, part of a pioneering wave that helped to establish mainstream digital photography. Designed for both amateur and advanced users, these models offered innovative features that set them apart from their contemporaries.

The Kodak DC240 was introduced in 1999 and featured a 1.3-megapixel sensor, which was suitable for capturing images at 1280x960 resolution. One of its standout features was its ability to store images on CompactFlash cards, allowing users to easily expand their storage capabilities. The camera offered an optical viewfinder as well as an LCD screen, providing versatility in composing photos.

The DC240 was equipped with a fixed-focus lens, which, although not as adaptable as later zoom lenses, produced decent image quality for its time. The camera supported several color modes and had the capability to adjust exposure settings, offering users a degree of creative control. Its design was compact and lightweight, making it portable for everyday photography.

Following closely, the Kodak DC280 was launched in 2000, representing a refinement of its predecessor. It boasted a higher 2.1-megapixel resolution, allowing for clearer, more detailed images at 1600x1200 resolution. The DC280 introduced a more sophisticated autofocus system, enabling users to capture sharper images with less effort.

Another notable advancement in the DC280 was its improved image processing capabilities, which enhanced the overall color accuracy and exposure control. The camera featured a 3x zoom lens, providing greater flexibility in framing shots at various distances. Additionally, the DC280 held a larger LCD screen with improved visibility, catering to users wanting to preview their images before capturing.

Both models utilized Kodak's Image processing technology, which was designed to optimize image quality and reduce noise, particularly in low-light conditions. They were capable of connecting to computers via USB, allowing for convenient image transfers to enhance the digital workflow.

In conclusion, the Kodak DC240 and DC280 not only advanced Kodak's position in the digital camera market but also contributed significantly to the evolution of digital photography. Their blend of user-friendly features, improved technology, and solid image quality marked a pivotal transition from film to digital media, paving the way for the versatility and convenience that modern photographers enjoy today.
Top Page Image Contents