Kodak DC240, DC280 manual Using a Serial Cable Connection, Connecting to a Windows-Based Computer

Page 68
Set the Mode dial to Connect.

Using a Serial Cable Connection

The most common means of connecting the camera to your computer is by serial cable connection. When connecting the camera, it is a good idea to use a Kodak-specified AC adapter (see page 5).

Connecting to a Windows-Based Computer

An RS-232 serial cable is provided so you can connect your camera to a Windows-based computer.

1

2 Plug the appropriate end of the serial cable into an available 9-pin serial port on the computer.

Serial ports are usually labeled COM1 and COM2, or A and B. If your computer has a 25-pin port, you need to use a 9-pin adapter (available at your local computer store) and attach it to the port before attaching the serial cable to the computer.

If the ports are not labeled, see your computer User’s Guide for a diagram that illustrates all of the external ports.

3 Open the serial/USB port door on the side of the camera.

4 Plug the other end of the serial cable into the camera serial port.

5 Slide the POWER switch to the right to turn on the camera.

If you get a message on your computer stating that you are not connected, refer to the Serial.PDF document installed with the software, or the online help for troubleshooting information.

62

Page 67 Page 69
Image 68
Page 67 Page 69
Contents User’s Guide Page Table of Contents Customizing Your Pictures Installing Your Software Where to Get Help Getting Started Turning the Camera On and Off Preparing to Take PicturesLoading Batteries Checking Batteries Using the Battery Charger Using an AC Adapter Inserting a Camera Memory Card Removing a Camera Memory CardSetting the Clock on Your Camera Main Camera Setup screen appearsAdjusting the LCD Brightness Taking Pictures Previewing a Picture Before it is Taken Pressing the Shutter Button Zooming in on Your Subject Setting a Quickview for Each Picture Viewing the Picture Just TakenLCD displays the Delete Picture screen Picture is permanently deleted from the camera memory cardMain Menu screen reappears Setting the Flash Flash setting icon changes in the Status DisplayPhotographing Distant Subjects Infinity Focus icon appears in the Status DisplayPhotographing Close-Ups Self-timer icon appears in the Status Display Putting Yourself in the PictureCurrent setting is checked  Adding the Date to Your PicturesLCD displays the main Menu screen LCD displays the Date Stamp screenDeleting the Picture Just Taken Customizing Your Pictures Adjusting the Camera Exposure LCD displays the Exposure Compensation screenFPO Adding a Border to Your PictureCapturing in Black-and-White, Sepia Tone, or Document Adjusting the Picture Quality Adjusting the Picture Resolution Selecting a White Balance for Indoor Pictures Choosing a Metering System Adjusting the ISO Setting DC280 only LCD displays the Auto ISO screen Current setting is Sharpening and Softening a Picture Locking in an Exposure Setting Page Reviewing Your Pictures Viewing Your Pictures LCD displays a magnified view of the selected picture Magnifying Your PicturesLast picture taken appears on LCD screen Selecting Pictures for Printing Last picture taken appears onMain Review Menu screen appears Print Order screen appearsCancelling Pictures for Printing Cancel CURRENT-cancelsPicture appears on the LCD with Protect icon Protecting Your PicturesProtect screen appears Pictures are deleted from the camera memory card Deleting One or All of Your PicturesDelete screen appears Running a Slide Show on Your Television Slide Show Interval screen appearsViewing Information About a Picture Page Personalizing Your Camera Setting a Response Beep Beep screen appears. The current setting is checked Saving Camera Power Power Save screen appears. The current Setting is checked Firmware Version-displays Viewing Camera InformationAbout screen appears Selecting a Language for the Camera Language screen appears. The current Setting is checked Main Camera Setup screen reappears Formatting Your Camera Memory Card Format Memory Card screen appearsAdjusting the Video Out Signal Video Out screen appears. The current setting is checked Borders Default screen appears. Adjusting the Camera Default SettingsSetting a Border Default Setting a Flash Default Flash Default screen appears. Current setting is checked Auto Main Default-adjusts Setting a White Balance DefaultWhite Balance Default screen appears Screen appears Setting an Exposure Compensation DefaultExposure Compensation Default No Effect Main Default-captures Setting an Effect DefaultEffects Default screen appears. Setting an Auto ISO Default DC280 only OFF Main Default-cameraPage Windows-Based System Requirements Macintosh System RequirementsKodak Software for Windows-Based Computers Software OverviewKodak Software for Macintosh Computers Page Connecting Your Camera Using a Serial Cable Connection Connecting to a Windows-Based ComputerConnecting to a Macintosh Computer Using a USB Cable Connection Opening Digital Access Software Twain Acquire Starting the Kodak Software for Windows-Based ComputersOpening Mounter Software Opening Camera Controls SoftwareOpening Digital Access Software Plug-In Acquire Starting the Kodak Software for Macintosh ComputersOpening Picture Transfer Application Picture Transfer icon appearsNavigating to Your Pictures Page Connecting with Your Camera Communicating with the Computer Adjusting Your Monitor for Better ViewingGetting Better Results from Your Printer Camera Memory Card Problem Cause Solution TroubleshootingComputer Monitor Problem Cause Solution Camera Communications Problem Cause Solution Camera Problem Cause Solution Camera Problem Cause Solution Camera Problem Cause Solution Camera Problem Cause Solution Camera Problem Cause Solution LCD Messages Cause Solution Faxed Information Online ServicesSoftware Help Customer Support Country Help number FaxCountry Help number Fax Page Warranty Time Period Warranty Repair CoverageLimitations How to Obtain Service Application SupportCanadian DOC Statement Regulatory InformationFCC Compliance and Advisory Original Camera Default Settings Feature SettingDC240 Camera Specifications DC240 CameraDC280 Camera Specifications DC280 CameraGeneral Maintenance and Safety Using Your Batteries Attempt to recharge them in the battery chargerBattery Charger Tips Index Page Page Page

DC280, DC240 specifications

The Kodak DC240 and DC280 were two influential digital cameras released in the late 1990s, part of a pioneering wave that helped to establish mainstream digital photography. Designed for both amateur and advanced users, these models offered innovative features that set them apart from their contemporaries.

The Kodak DC240 was introduced in 1999 and featured a 1.3-megapixel sensor, which was suitable for capturing images at 1280x960 resolution. One of its standout features was its ability to store images on CompactFlash cards, allowing users to easily expand their storage capabilities. The camera offered an optical viewfinder as well as an LCD screen, providing versatility in composing photos.

The DC240 was equipped with a fixed-focus lens, which, although not as adaptable as later zoom lenses, produced decent image quality for its time. The camera supported several color modes and had the capability to adjust exposure settings, offering users a degree of creative control. Its design was compact and lightweight, making it portable for everyday photography.

Following closely, the Kodak DC280 was launched in 2000, representing a refinement of its predecessor. It boasted a higher 2.1-megapixel resolution, allowing for clearer, more detailed images at 1600x1200 resolution. The DC280 introduced a more sophisticated autofocus system, enabling users to capture sharper images with less effort.

Another notable advancement in the DC280 was its improved image processing capabilities, which enhanced the overall color accuracy and exposure control. The camera featured a 3x zoom lens, providing greater flexibility in framing shots at various distances. Additionally, the DC280 held a larger LCD screen with improved visibility, catering to users wanting to preview their images before capturing.

Both models utilized Kodak's Image processing technology, which was designed to optimize image quality and reduce noise, particularly in low-light conditions. They were capable of connecting to computers via USB, allowing for convenient image transfers to enhance the digital workflow.

In conclusion, the Kodak DC240 and DC280 not only advanced Kodak's position in the digital camera market but also contributed significantly to the evolution of digital photography. Their blend of user-friendly features, improved technology, and solid image quality marked a pivotal transition from film to digital media, paving the way for the versatility and convenience that modern photographers enjoy today.
Top Page Image Contents