Kodak CD43 manual Changing the flash settings, Off Never

Doing more with your camera

Changing the flash settings

Press the Flash button repeatedly to scroll through flash modes

(see Flash modes table).

The active flash icon is displayed on the LCD screen.

Flash button

NOTE: Flash settings are pre-set for each picture-taking mode. Some of the flash settings may not be available in all Capture or Scene modes. When you change to Auto or Red-eye in some of these modes, it becomes the default until you change it.

Flash modes	Flash fires
Auto	When the lighting conditions require it.
Flash
Fill	Every time you take a picture, regardless of the lighting conditions. Use
	when the subject is in shadow or is “backlit” (when light is behind the
	subject). In low light, hold the camera steady or use a tripod.
Red-eye	Once, so the subject’s eyes become accustomed to the flash, then fires
	again when the picture is taken. (If the lighting conditions require flash
	but do not require Red-eye reduction, the flash may fire only once.)
Off	Never

www.kodak.com/go/support 25