Kodak CD43 manual Direct printing PictBridge problems, Status Solution

			Troubleshooting
Ready light glows		■ Shutter button is pressed halfway down. Focus and exposure are set.
steady green		Camera is operating normally.
Ready light glows		■ The Mode dial is set to Favorites. Camera is operating normally.
steady orange
Ready light blinks		■ Flash is not charged. Wait. Resume picture-taking when the light stops
orange		blinking and turns off.
		■ Auto exposure or auto-focus are not set. Release the Shutter button
		and recompose the picture.
Ready light glows		■ Camera’s internal memory or card is full. Transfer pictures to the
steady red		computer (page 15), delete pictures from camera (page 13), switch
		image storage locations (page 30), or insert card with available
		memory (page 3).
		■ Camera processing memory is full. Wait. Resume picture-taking when
		the light turns off.
		■ Card is read-only. Change image storage location to internal memory
		(page 30), or use a different card.
Direct printing (PictBridge) problems
	Status		Solution
	Cannot locate desired picture.		■ Turn the Mode dial to Auto. Make sure the camera is
			not in Favorites mode.
			■ Use the Direct print menu to change the image storage
			location.
	The Direct print menu interface		■ Press any button to redisplay the menu.
	turns off.
	Cannot print pictures.		■ Ensure that there is a connection between camera and
			printer (page 16).
			■ Ensure the printer and camera have power (page 17).
	Camera or printer display an		■ Follow the prompts to resolve the issue.
	error message.
www.kodak.com/go/support				45