Yamaha RX-396RDS/396 Selecting the SPEAKER system, Adjusting the BALANCE control, gained

Selecting the SPEAKER system

Because one or two speaker systems can be connected to this unit, the SPEAKERS switches allow you to select speaker system A or B, or both at once.

SPEAKERS

A B

ON

Adjusting the BALANCE control

Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions.

BALANCE

l	0	l
2		2
3		3
4		4
L 5		5 R

Adjusting the BASS and TREBLE controls

BASS				TREBLE
l	0	l		l	0	l
2			2	2		2
3			3	3		3
4			4	4		4
5		5		5		5

BASS : Turn this clockwise to increase (or counter- clockwise to decrease) the low frequency response.

TREBLE : Turn this clockwise to increase (or counter- clockwise to decrease) the high frequency response.

Adjusting the continuously variable LOUDNESS control

This control provides compensation for the human ears’ loss of sensitivity to high and low-frequency ranges at low volume. This control is adjustable to retain full tonal range at any volume level.

1

LOUDNESS

l FLAT –30dB

2 l0

3		9	Set to the “FLAT” position.
4		8
5	6	7

VOLUME

2 l6

20	l2
28	8
40	Set to the loudest listening level
	4

that you would listen in.

602

0

–dB

3

LOUDNESS			Turn until the desired volume is
l	FLAT	–30dB
2		l0	gained.
3		9
4		8
5	6	7

Using the PURE DIRECT switch

RX-496RDS and RX-496 only

You can enjoy the purest possible sound from your audio sources by pressing this switch so that the indicator lights up. By doing so, the audio signal bypasses the BASS, TREBLE, BALANCE and LOUDNESS controls, eliminating any alteration to the audio signal.

To cancel this function, press it again so that the indicator goes off.

Indicator

PURE DIRECT

16