Yamaha RX-396RDS/396 Automatic Preset Tuning, RX-496RDSand RX-396RDSonly, Fm/Am, Down Tuning Up

AUTOMATIC PRESET TUNING

You can make use of an automatic preset tuning function for FM stations. With this function, this unit performs automatic tuning and stores FM stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on page 18.

*RX-496RDS and RX-396RDS only

Only RDS stations can be stored by this function. (Refer to page 21 to 25 for details about RDS stations.)

To store stations

NATURAL SOUND STEREO RECEIVER

																										VOLUME
																									20	l6
																				TUNER			PHONO	CD		l2
																									28	8
STANDBY/ON
																									40	4
																				AUX			TAPE 2	TAPE 1/MD	60	2
																							MONITOR
		A/B/C/D/E	1			2			3			4		5	6		7	8								0
																										–dB
PHONES	SPEAKERS		BASS					TREBLE				BALANCE			LOUDNESS				FM/AM		DOWN TUNING UP
			l	0	l			l	0	l		l	0	l	l	FLAT	–30dB
	A	B
			2			2	2				2	2		2	2		l0
			3			3	3				3	3		3	3		9		MEMORY		EDIT	TUNING
																							MODE
	ON	OFF	4			4	4				4	4		4	4		8
			5		5		5			5		L 5		5 R	5 6 7
																			MAN’L/AUTO FM			AUTO/MAN’L MONO

1 2 3

English

1

FM/AM

2 Press and hold for more than 3 seconds.

MEMORY

MAN’L

MEMOAUTO

Flashes.

3

DOWN TUNING UP

To tune to higher frequencies, press right side once. To tune to lower frequencies, press left side once.

*If the TUNING button is not pressed, in a while, the automatic preset tuning begins automatically toward higher frequencies.

The automatic preset tuning begins from the frequency currently displayed. Received stations are programmed to A1, A2 ... A8 sequentially.

*If more than 8 stations are received, they are also programmed to the preset station numbers of other groups (B, C, D and E) in that order.

If you want to store the first station received by the automatic preset tuning to a desired preset station number:

If, for example, you want to store the first received station to C5, select “C5” by using theA/B/C/D/E button and the preset station number selector buttons after pressing the MEMORY button in step 2. Then press the TUNING button. The first received station is stored to C5, and next stations to C6, C7 ...

sequentially.

If stations are stored up to E8, the automatic preset tuning finishes automatically.

19