Yamaha RX-397 Customized automatic preset tuning, FM appears in the front panel display

Page 26

FM/AM TUNING

2Press FM/AM on the front panel to select FM as the reception band.

FM appears in the front panel display.

FM/AM

3Press and hold MEMORY on the front panel for more than 3 seconds.

The preset station group and the MEMORY and AUTO indicators flash in the front panel display.

MEMORY

MAN'L/AUTO FM

4Press TUNING l / h once to begin automatic preset tuning.

Press h to tune into higher frequencies. Press l to tune into lower frequencies.

When automatic preset tuning is complete, the frequency of the last preset station is shown in the front panel display.

l TUNING h

Notes

If TUNING l / h is not pressed within approximately 5 seconds while the MEMORY and AUTO indicators are flashing, automatic preset tuning automatically begins from the currently displayed frequency and proceeds toward higher frequencies.

Received stations are sequentially programmed to 8 stations in each preset station group (A1 to A8). If 8 stations are all programmed in a preset station group, another 8 stations are sequentially programmed in the next preset station group.

Customized automatic preset tuning

You can specify a preset station group and a preset station number from which this unit stores the FM stations received by automatic preset tuning.

1Press and hold MEMORY on the front panel for more than 3 seconds.

MEMORY

MAN'L/AUTO FM

2Press A/B/C/D/E and then press one of the preset station number buttons on the front panel to select the preset station group and the preset station number where the first received station will be stored.

For example, if you select C5, the first received station is automatically programmed to C5 and the next received stations are sequentially programmed to C6, C7, etc.

A/B/C/D/E

1

2

3

4

5

6

7

8

3Press TUNING l / h on the front panel to begin automatic preset tuning.

Press h to tune into higher frequencies. Press l to tune into lower frequencies.

When automatic preset tuning is complete, the frequency of the last preset station is shown in the front panel display.

l TUNING h

Note

Automatic preset tuning stops when the received stations have all been stored up to E8.

22

Image 26
Contents RX-397 Important Safety Instructions Serial NoFCC Information for US customers Iii Contents Built-in 2-channel power amplifier Other features FeaturesSupplied Accessories Sophisticated AM/FM tunerControls and Functions Front panelPhones jack Preset station number buttons 1 toInput selector Front panel display Europe model onlyRear panel Asia and General models onlyRemote control Handling the remote control Installing batteries in the remote controlUsing the remote control Approximately 6 m 19.7 ftSpeakers a ConnectionsCD/DVD player MD recorder MP3 player, etc Etc Speakers BConnecting speakers Connecting the banana plugGround GND terminal Connecting the AM and FM antennasOutdoor AM antenna Connecting the AM loop antenna Release the tabMemory back-up Impedance Selector switchRemote jacks Press STANDBY/ON on the front panel or Power on the remote control to turn on thisTurning on and off this unit UnitFront panel Playing and RecordingPlaying a source Using the Pure Direct button Adjusting the tonal qualityAdjusting the Balance control Adjusting the Loudness controlRecording a source Using the Sleep timer Mute indicator disappears from the front panel display Press Mute on the remote control to mute the sound outputMute indicator flashes in the front panel display Muting the sound outputFM or AM appears in the front panel display FM/AM TuningAutomatic tuning Lights upManual tuning is effective when station signals are weak Manual tuningAutomatic preset tuning Hold down the button to continue tuning searchFM appears in the front panel display Customized automatic preset tuningPress Tuning l / h once to begin automatic preset tuning Manual preset tuning Press Memory on the front panelPress Edit on the front panel again Selecting preset stationsExchanging preset stations FlashesAdvanced Setup menu parameters Advanced SetupChanging the Advanced Setup menu parameters Factory presets PresetPress STANDBY/ON to confirm your setting See page 25 for available parametersTroubleshooting GeneralTuner Function properly Remote controlDoes not work nor Specifications Audio SectionThis product mainly uses lead-free solder RX-497/RX-397 Example of Antenna Grounding