Yamaha RX-397 owner manual Specifications, Audio Section

Page 34

SPECIFICATIONS

AUDIO SECTION

• Minimum RMS Output Power

 

 

(8 Ω , 20 Hz to 20 kHz, 0.04% THD)

50 W + 50 W

• Dynamic Power (IHF)

 

 

(8/6/4/2 Ω)

70/77/89/100 W

• Maximum Output Power [Europe model only]

 

(1 kHz, 0.7% THD, 4 Ω)

55 W

• IEC Output Power [Europe model only]

 

 

(1 kHz, 0.04% THD, 8 Ω)

52 W

• Power Band Width

 

 

(0.08% THD, 25 W, 8 Ω)

10 Hz to 50 kHz

• Damping Factor (SPEAKERS A)

 

 

20 Hz to 20 kHz, 8 Ω

150 or more

• Maximum Output Power (EIAJ)

 

 

[Asia and General models only]

 

 

(1 kHz, 10% THD, 8 Ω)

85 W

• Maximum Input Signal

 

 

PHONO (1 kHz, 0.04% THD)

115 mV or more

CD/DVD, etc. (1 kHz, 0.04% THD)

2.2 V or more

• Frequency Response

 

 

CD/DVD, etc. (20 Hz to 20 kHz)

0 ± 0.5 dB

CD/DVD, etc.

 

 

PURE DIRECT ON (10 Hz to 100 kHz)

0 ± 1.0 dB

• RIAA Equalization Deviation

 

 

PHONO

± 0.5 dB

• Total Harmonic Distortion

 

 

PHONO to OUT (REC)

 

 

(20 Hz to 20 kHz, 3 V)

0.02% or less

CD/DVD, etc. to SPEAKERS

 

 

(20 Hz to 20 kHz, 25 W, 8 Ω)

0.02% or less

• Signal to Noise Ratio (IHF-A Network)

 

 

PHONO (5 mV input shorted)

82 dB or more

CD/DVD, etc. (150 mV input shorted)

108 dB or more

• Residual Noise (IHF-A Network)

 

 

PURE DIRECT ON

100 µV

• Input Sensitivity/Input..................................................................Impedance

2.5 mV/47 kΩ

PHONO

 

CD/DVD, etc

150 mV/47 kΩ

• Output Level/Output Impedance

150 mV/1.2 kΩ or less

OUT (REC)

• Headphone Output/Impedance

 

 

(Input 1 kHz, 150..........................................................mV, 8 Ω , 0.04% THD)

0.47 V/330 Ω

CD/DVD, etc.

 

• Channel Separation

 

 

CD/DVD, etc. (5.1 kΩ input shorted, 1/10 kHz)

....... 65/50 dB or

more

 

 

• Tone Control Characteristics

 

 

BASS

 

 

Boost/Cut (50 Hz)

±10 dB

Turnover Frequency

350 Hz

TREBLE

 

 

Boost/Cut (20 kHz)

±10 dB

Turnover Frequency

3.5 kHz

• Continuous Loudness Control

 

 

Attenuation (1 kHz)

–30 dB

FM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

.......................... 87.5 to 107.9 MHz

[Asia and General models]

87.5/87.50 to 107.9/108.00 MHz

[Other models]

87.50 to 108.00 MHz

• Usable Sensitivity (IHF)

1.0 µV (11.2 dBf)

• Signal to Noise Ratio (IHF)

 

Mono/Stereo

76 dB/70 dB

• Harmonic Distortion (1 kHz)

 

Mono/Stereo

0.2%/0.3%

• Stereo Separation (1 kHz)

45 dB

• Frequency Response

20 Hz to 15 kHz, +0.5/–2 dB

AM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

.............................. 530 to 1710 kHz

[Asia and General models]

530/531 to 1710/1611 kHz

[Other models]

531 to 1611 kHz

• Usable Sensitivity

300 µV/m

GENERAL

• Power Supply

 

 

[U.S.A. and Canada models]

............................. AC 120 V, 60 Hz

[Asia model]

AC 220/230-240 V, 50/60 Hz

[General model]

AC 110/120/220/230-240 V, 50/60 Hz

[Australia model]

AC 240 V, 50 Hz

[Europe model]

AC 230 V, 50 Hz

• Power Consumption

130 W

• Standby Power Consumption

......................................

0.1 W or less

• Maximum Power Consumption [General model only]

(8 Ω , 1 kHz, 10% THD)

300 W

• AC Outlets

 

 

[Australia model]

1 (Total 100 W maximum)

[General model]

2 (Total 50 W maximum)

[Other models]

2 (Total 100 W maximum)

• Dimensions (W x H x D)

435 x 151 x 308 mm

 

 

(17-1/8” x 5-15/16” x 12-1/8”)

• Weight

7.4 kg (16 lbs. 5 coz.)

* Specifications are subject to change without notice.mm

30

Image 34
Contents RX-397 Important Safety Instructions Serial NoFCC Information for US customers Iii Contents Built-in 2-channel power amplifier Other features FeaturesSupplied Accessories Sophisticated AM/FM tunerControls and Functions Front panelInput selector Preset station number buttons 1 toPhones jack Front panel display Europe model onlyRear panel Asia and General models onlyRemote control Handling the remote control Installing batteries in the remote controlUsing the remote control Approximately 6 m 19.7 ftSpeakers a ConnectionsCD/DVD player MD recorder MP3 player, etc Etc Speakers BConnecting speakers Connecting the banana plugOutdoor AM antenna Connecting the AM and FM antennasGround GND terminal Connecting the AM loop antenna Release the tabRemote jacks Impedance Selector switchMemory back-up Press STANDBY/ON on the front panel or Power on the remote control to turn on thisTurning on and off this unit UnitPlaying a source Playing and RecordingFront panel Using the Pure Direct button Adjusting the tonal qualityAdjusting the Balance control Adjusting the Loudness controlRecording a source Using the Sleep timer Mute indicator disappears from the front panel display Press Mute on the remote control to mute the sound outputMute indicator flashes in the front panel display Muting the sound outputFM or AM appears in the front panel display FM/AM TuningAutomatic tuning Lights upManual tuning is effective when station signals are weak Manual tuningAutomatic preset tuning Hold down the button to continue tuning searchPress Tuning l / h once to begin automatic preset tuning Customized automatic preset tuningFM appears in the front panel display Manual preset tuning Press Memory on the front panelPress Edit on the front panel again Selecting preset stationsExchanging preset stations FlashesAdvanced Setup menu parameters Advanced SetupChanging the Advanced Setup menu parameters Factory presets PresetPress STANDBY/ON to confirm your setting See page 25 for available parametersTroubleshooting GeneralTuner Does not work nor Remote controlFunction properly Specifications Audio SectionThis product mainly uses lead-free solder RX-497/RX-397 Example of Antenna Grounding