Yamaha RX-397 Features, Supplied Accessories, Built-in 2-channel power amplifier Other features

Page 6

FEATURES

Built-in 2-channel power amplifier

Other features

Minimum RMS output power

PURE DIRECT button used to reproduce the purest

50 W + 50 W (8 Ω), 0.04% THD, 20 Hz to 20 kHz

source sound

Highly dynamic power, low impedance drive

Continuously variable loudness control

capability

Sleep timer

Sophisticated AM/FM tuner

Remote control capability

 

40-station random access preset tuning

 

Automatic preset tuning

 

Preset station exchanging capability

 

Radio Data System tuning capability

 

(Europe model only)

 

y indicates a tip for your operation.

Some operations can be performed by using either the buttons on the front panel of this unit or those on the remote control. In case the button names differ between this unit and the remote control, the names of the buttons on the remote control are given in parentheses.

This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and the product, the product has priority.

SUPPLIED ACCESSORIES

Please check that you received all of the following parts.

Remote control

SLEEPPOWER

CD/DVD PHONO TUNER STANDBY

MD TAPE AUX SPEAKERS

A

B

u+

PRESET VOLUME

d

A/B/C/D/E

 

 

MUTE

 

A/B

 

w

e

f

DISPLAY

DIR A

 

DIR B

REC

b

s

a

DISC

FREQ/TEXT

MODE

PTY SEEK START

EON

AMP DEVICE

 

CD TAPE

p

Batteries (x2)

AM loop antenna

(AAA, R03, UM-4)

 

Indoor FM antenna

Indoor FM antenna

(U.S.A., Canada and

(Europe and Australia

General models)

models)

2

Image 6
Contents RX-397 Important Safety Instructions Serial NoFCC Information for US customers Iii Contents Built-in 2-channel power amplifier Other features FeaturesSupplied Accessories Sophisticated AM/FM tunerControls and Functions Front panelPreset station number buttons 1 to Input selectorPhones jack Front panel display Europe model onlyRear panel Asia and General models onlyRemote control Handling the remote control Installing batteries in the remote controlUsing the remote control Approximately 6 m 19.7 ftSpeakers a ConnectionsCD/DVD player MD recorder MP3 player, etc Etc Speakers BConnecting speakers Connecting the banana plugConnecting the AM and FM antennas Outdoor AM antennaGround GND terminal Connecting the AM loop antenna Release the tabImpedance Selector switch Remote jacksMemory back-up Press STANDBY/ON on the front panel or Power on the remote control to turn on thisTurning on and off this unit UnitPlaying and Recording Playing a sourceFront panel Using the Pure Direct button Adjusting the tonal qualityAdjusting the Balance control Adjusting the Loudness controlRecording a source Using the Sleep timer Mute indicator disappears from the front panel display Press Mute on the remote control to mute the sound outputMute indicator flashes in the front panel display Muting the sound outputFM or AM appears in the front panel display FM/AM TuningAutomatic tuning Lights upManual tuning is effective when station signals are weak Manual tuningAutomatic preset tuning Hold down the button to continue tuning searchCustomized automatic preset tuning Press Tuning l / h once to begin automatic preset tuningFM appears in the front panel display Manual preset tuning Press Memory on the front panelPress Edit on the front panel again Selecting preset stationsExchanging preset stations FlashesAdvanced Setup menu parameters Advanced SetupChanging the Advanced Setup menu parameters Factory presets PresetPress STANDBY/ON to confirm your setting See page 25 for available parametersTroubleshooting GeneralTuner Remote control Does not work norFunction properly Specifications Audio SectionThis product mainly uses lead-free solder RX-497/RX-397 Example of Antenna Grounding