Kodak MD81 manual AF Control Still, White Balance, Face Detect Capture, Off, Exposure Metering

			Using the Menu button
Press Menu,		, then	Capture Options
	, and OK to	access	IMPORTANT: Your camera offers a built-in Help system.
settings			See page 40.
AF Control (Still)			Continuous AF—because the camera is always focusing,
Choose an auto-focus setting.			there is no need to press the Shutter button halfway down to
			focus.
			Single AF—uses TTL-AF (through-the-lens auto focus) when
			the Shutter button is pressed halfway down.
White Balance			Auto—automatically corrects white balance. Ideal for general
Choose your lighting			picture taking.
condition. (Available only in			Daylight—for pictures in natural lighting.
Program and Panorama			Tungsten—corrects the orange cast of incandescent light
modes.)
			bulbs. Ideal for indoor pictures under tungsten or halogen
			lighting without flash.
			Fluorescent—corrects the green cast of fluorescent lighting.
			Ideal for indoor pictures under fluorescent lighting without
			flash.
			Open Shade—for pictures in shade in natural lighting.
Face Detect Capture			On—in SCN modes designed for pictures of people, the
Choose if faces get focus			camera attempts to focus on faces.
priority.			Off

NOTE: Not available in Smart Capture mode (because face detection is always on).

Exposure Metering

Evaluate light levels at specific areas of a scene.

Multi-Pattern—evaluates lighting conditions throughout the image to give an optimum picture exposure. Ideal for general picture taking.

Center-Weight—evaluates the lighting conditions of the subject centered in the lens. Ideal for backlit subjects.

Center-Spot—similar to Center-weight, except the metering is concentrated on a smaller area of the subject centered in the LCD.

www.kodak.com/go/support 27