Kodak 1772789 manual Picture quality problems, Picture is not clear

Troubleshooting

Picture quality problems

Status	Solution
Picture is not clear	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ Clean the lens (see page 49).
	■ Make sure the camera is not in Macro mode if you are more than
	27.6 in. (70 cm) from your subject (see page 33).
	■ Place the camera on a flat, steady surface or use a tripod (especially
	in high-zoom settings or in low light).
	■ Use a larger picture size (see page 31).
	■ If you’re manually adjusting the ISO speed, realize that high ISO
	setting may cause grainy pictures (see page 32).
Picture is too dark	■ Reposition the camera for more available light.
	■ Use Fill flash (see page 10) or change your position so light is not
	behind the subject.
	■ Move so that the distance between you and the subject is within the
	effective flash range. (See Camera specifications, page 47.)
	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ In Program mode, adjust the Exposure Compensation (see page 32).
Picture is too light	■ Reposition the camera to reduce the amount of available light.
	■ Turn the flash off (see page 10).
	■ Move so that the distance between you and the subject is within the
	effective flash range. (See Camera specifications, page 47.)
	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ In Program mode, adjust the Exposure Compensation (see page 32).

44 www.kodak.com/go/support