UNLOADING THE FILM
After you take the last picture on the film cassette, the film automatically starts to rewind. When the film is fully rewound, the Picture Counter (22) on the LCD Panel (5) displays a blinking “0” (b), and a blinking “E” (c) will appear when you remove the film from the camera.
IMPORTANT: Do not remove the film cassette from the camera until the motor stops and a blinking “0” appears on the LCD panel.
Using the Rewind Button
If you don’t want to take pictures on the entire film cassette, you can automatically rewind the film by pressing the Rewind Button (3). Once you’ve used this feature, you cannot reload the same film cassette into the camera.
21